Rør, hvis du tør



Re: Rør, hvis du tør - Elemental Amps

IndlĂŚgaf kvik » 3. mar 2014, 18:56

Elemental Watson II ($235)

Elemental Watson II.jpg
Elemental Watson II.jpg (589.94 KiB) Vist 50804 gange

Watson sets a new standard on the cost/performance ratio. Elemental Amps is proud to present the Elemental Watson II, a class-A valve/Mosfet hybrid headphone amplifier. A powerful and delicate sound accompanied by the warmth of valves delivered in a compact chassis

By trimming down on unnecessary luxuries and focusing on core performance, the Watson II is able to operate in a dual mono configuration, with a military grade NOS 6AK5 tubes being the centrepiece of each channel’s gain stage. Not only does this deliver rich harmonics typical of single ended class-A valve amps but also reduces warm-up time of the valves significantly whilst extending the life of each valve to operate at their peak performance for more than 1000 hours per channel.

Followed by class-A power MOSFET output stage, it provides almost limitless driving current while preserving the tube’s charming signature. The configuration also guarantees best channel separation (stereo image), easy maintenance and adjustment on the individual channel.

Compared to the original Elemental Watson, the new Watson II now has RCA line-in at the back, 3.5mm line-in at front, 30VDC power supply instedad of 26VDC, and no option to manually adjust pre-amp gain into the tubes.


Features
• Full Class-A amplification at all stages
• Dual mono design for best channel separation and stereo 
• Quiet operation during power on/off and low residue noise 
• NOS 6AK5 military grade tubes for longer stable lifespan 
• Extended bandwidth meeting Hi-Res standard
• Variable pre-amplifier output with dedicated terminals 
• Supports 30- 600 Ohm impedance headphones. 
• High performance at entry level price
• Compact and light-weight 

Specifications:
• Frequency Response: 10 Hz – 100 kHz (-3dB) 
• Output power: 250 mW + 250 mW (300 ohm) ; 2000 mW + 2000 mW (30 ohm) 
• Headphone impedance: 30 ohm – 600 ohm 
• Power supply: 26V/0.8A DC adaptor 
• Power Consumption: ≤ 22W idle, 50W max.
• Dimensions: 140 (l) x 90 (w) x 130 (h) mm
• Net weight: 320 grams

https://store.jaben.com/products/elemen ... -amplifier
https://www.head-fi.org/t/823002/elemen ... view-added

Suplementary note: Originally introduced by Phatlab Audio, a Jaben Network offspring. Apparently designed as a USA-Japan-Taiwan collaboration, and manufactured in Taiwan. Available at Jaben and various other places.



Elemental Sherlock ($385)

587E0012-8F02-4599-92F2-93DA1129E282.jpeg
587E0012-8F02-4599-92F2-93DA1129E282.jpeg (156.2 KiB) Vist 50795 gange

Following the tradition of Elemental Amps , Sherlock is designed for a no-compromise performance at a very affordable price. During the design process, we took further steps to make Sherlock modular and expandable, from a stereo amp to a fully balanced amplifier. We are pleased that we succeeded in producing the Sherlock with unprecedented driving capability and musicality at a very cost-effective price point.

To arrive at our goal, we trimmed all unnecessary features and cosmetics. We then focused on Sherlock's core competence - the amplification. The kernel of Sherlock is a class-A tube gain stage that dominates the sound quality with the tubes unique signature. This is followed by a single-ended class-A MOSFET power stage to provide plenty of current for demanding headphones. Sherlock's uniqueness is the added bridged circuits ahead of the main amp. These circuits when activated, converts input signals into balanced (positive plus negative polarities) format and feeds to left and right channels. This special design feature turns a tandem pair of Sherlock into a truly stereo balanced amplifier.

Sherlock is the first bridgeable headphone amplifier and audiophiles can enjoy the single chassis first and subsequently upgrade to double chassis for balanced performance. The audiophile with their numerous
headphone collection will find the Sherlock a timeless investment.


Features
Upgradable dual-mono balanced configuration
Bridgeable 4x output power
6AK5 military grade vacuum tubes
High capacity power reservoir and audio grade passive components

Specifications
Frequency Response 5Hz - 50 kHz (-3dB)
Output power 1000 mW + 1000 mW (60 ohm)
Headphone impedance 16 ohm - 600 ohm
Max. Input Voltage 2V (RMS)
Inputs 1 pair RCA
Outputs 1 x 1/4" TRS
Power supply 30V/0.8A power adaptor
Dimensions 16 x 14 x 4.5 cm
Net weight 850 g

https://store.jaben.com/products/elemental-sherlock
Senest rettet af kvik 12. dec 2021, 20:29, rettet i alt 2 gange.
Begrundelse: Opdatering
kvik

Brugeravatar
 
IndlĂŚg: 4718
Tilmeldt: 28. jul 2011, 01:27
Geografisk sted: Norge

Re: Rør, hvis du tør -

IndlĂŚgaf kvik » 3. mar 2014, 19:23

Reserved..
Senest rettet af kvik 4. mar 2014, 17:45, rettet i alt 1 gang.
kvik

Brugeravatar
 
IndlĂŚg: 4718
Tilmeldt: 28. jul 2011, 01:27
Geografisk sted: Norge

Re: Rør, hvis du tør - Rolls Corp.

IndlĂŚgaf kvik » 3. mar 2014, 19:26

Bellari HA540 MK2 ($200)

Bellari HA540 mk2.jpg
Bellari HA540 mk2.jpg (556.26 KiB) Vist 40830 gange

Pure Class A Stereo Headphone Amplifier

The new 2019 HA540 MK2 no headphone amp has impressed us more than the Bellari HA540. It is a lush sounding 12AX7 tube headphone amp running 150 regulated volts to the tube plates. With plenty of gain that is uniquely capable of driving headphones rated from 8-2000 Ohms. Having two separate inputs, it’s brilliantly designed to work equally well with different source components. It will produce superb clarity when connected directly to a CD player, computer, phone or DAC. A zero-feedback design guarantees a smooth natural analog response. It will be the thing that kicks your music up a notch, and gets you addicted to this hobby. There is a definite weight to the audio quality, in the sense that everything felt like it had some genuine power driving it.

In a world where headphone amps can cost anywhere from $99 to $1999 and some even $7000. It is hard to find honesty in what is a real true improvement in build quality or sound. How can you read through the online reviews to get a good idea of what to buy when it is clear that some reviews are paid for or that other reviews are not taking into account the full story, in personal experience or knowledge. What I can tell honestly, is that the HA540 is hand built in Salt Lake City, UT by people who have been in the industry for a few decades. We have seen it all, from companies selling the equivalent of snake oil and charging outrageously for it, to honest companies that have unfortunately fallen by the wayside.

The HA540 is an honest and true headphone amplifier. While it is not inexpensive by most standards it is truly an audio bargain for its build and sound quality. It has the lowest amount of ear fatigue of any headphone amp we have heard at any price


Specifications
• Input Impedance: 47kΩ
• Max Output Gain: 19.6dB
• THD: 0.04%, 20Hz - 20kHz, @ 1V RMS
• S/N Ratio: 85dB, unweighted
• Indicator: 1 Power LED
• Max Output Power: 332mW/side, 664mW/Channel (@30Ω)
• Frequency Response: 6Hz - 51kHz ±3dB
• Phase Shift (In to Out): 0°
• Crosstalk: -75dB
• Headphone impedance: 8Ω - 2000Ω
• Input Connectors: CH 1: RCA, 3.5mm, Stereo / CH 2: RCA
• Outputs: 1/4", 1/8" (3.5mm) TRS Stereo jacks
• Power: 15 VDC, 500mA (power supply included, P/N: PS27S)
• Size: 6" x 2.5" x 5.4"
• Weight: 2lbs

http://www.bellariaudio.com/index.php/p ... amplifier/
Senest rettet af kvik 30. dec 2021, 13:49, rettet i alt 2 gange.
Begrundelse: Opdatering
kvik

Brugeravatar
 
IndlĂŚg: 4718
Tilmeldt: 28. jul 2011, 01:27
Geografisk sted: Norge

Re: Rør, hvis du tør - Ayon Audio

IndlĂŚgaf kvik » 3. mar 2014, 19:28

Ayon HA-3 II ($4000)

Ayon HA-3.jpg
Ayon HA-3.jpg (187.26 KiB) Vist 22615 gange

The HA-3 II was developed for headphone lovers searching exclusively the very special music experience.

It impresses with it’s Single-Ended-Triode technology taken to its respective extremes by Ayon in all their products. Selected in-house AA45 Mesh super triodes, the perhaps most perfect and best sounding low-power triode for headphone amp design, are applied in combination with special super-permalloy wound output transformers.

At the HA-3 deliberately all useless gimmicks have been omitted. The HA-3 II is designed without compromise in its circuitry as well as in its power conditioning; therefore, a separate top-class power supply was inevitable; on the one hand it guarantees extraordinary voltage and current stability and lowest hum.

With its powerful, airy, and lively play, paired with a superb spatiality with emotional reproduction the HA-3 II drives every dynamic headphone to absolutely maximum tonal performance. From treble in brilliant resolution to absolutely authentic colourful mid-range and a deep resilient bass. At the same time, it fascinates by its incredible ease, closeness and control at any kind of reproduction that is second to none.



FEATURES & DESIGN

Vacuum tubes
• Ayon AA45 Mesh power output tubes

Signal path
• Logical sequenced soft-start power up for extended tube life
• Ultra short signal path
• Simplest direct circuit path for purest musical sound and high reliability
• No solid state devices in the signal path
• High current and low impedance design that operates tubes in the best areas their curves
• Automatic bias adjustment
• No followers or buffers in the signal path
• Quality parts throughout

Power supply
• Low noise –insulated power transformers
• Power transformer is excellent damped and RFI/EMI shielded
• Innovative power supply provides a high speed energy delivery on transients
• Choke filtered power supply
• Separate and isolated power supplies over each stage of amplification
• High current filament-regulator for pre/driver tubes
• Regulated DC filament supplies with soft start
• AC power line filter to avoid noise and hash from entering into the unit.

Output transformer
• Super-wide bandwidth high performance - super permalloy output transformer
• High efficiency with low insertion loss for optimal current and voltage transfer
• Multiple tight layering and coupling for extended frequency response
• Output transformers are sealed with an anti-resonance compound material

Components
• Selected,  quality passive components used in all applications
• High speed  & high quality audiophile grade coupling capacitors
• Special tube sockets with beryllium- copper spring pins, custom made by Ayon
• High quality – RCA input jack
• Special isolated - internal wiring
• Copper matrix - internal signal cable
• Gold-plated industrial grade PCB

Mechanical construction
• High grade aluminum chassis - All brushed, anodized, anti-vibration-resonance and non-magnetic
• Improved heat ventilation chassis
• Custom-made machined control knobs
• All front & rear panel descriptions are engraved
• Chassis finish: black / black


SPECIFICATIONS
• Class of Operation: Pure Class A, SE-Triode
• Tube Complement: 2 x AA45 Mesh, 2 x 12AU7
• S/N Ratio: > 100dB (unweighted)
• Input Impedance: 50 kΩ
• Frequency Response at 32Ω: 15 Hz - 35kHz
• Harmonic Distortion (at 150mV ): < 0.01%
• Channel Separation L/R: > 89dB
• Output Power at 32Ω: 500mV
• Output Impedance - Headphone: 16Ω – 600Ω
• Line Input: RCA phono sockets
• Headphone output: ¼” Stereo Jack (6.35mm)
• Power Consumption: ~ 65W
• Dimensions Main Unit (WxDxH): 22x30x20 cm
• Dimension Power Supply (WxDxH): 22x30x10 cm
• Weight (Main): 8kg
• Weight (Power Supply): 7kg


https://www.ayonaudio.com/products/powe ... ries/ha-3/
https://www.ayonaudiousadirect.com/prod ... phone-amp/
Senest rettet af kvik 6. dec 2021, 22:49, rettet i alt 2 gange.
Begrundelse: Opdatering
kvik

Brugeravatar
 
IndlĂŚg: 4718
Tilmeldt: 28. jul 2011, 01:27
Geografisk sted: Norge

Re: Rør, hvis du tør - Music Hall Audio

IndlĂŚgaf kvik » 3. mar 2014, 19:30

Music Hall PH25.2 ($400)

Music Hall PH25.2.jpg
Music Hall PH25.2.jpg (40.7 KiB) Vist 55600 gange

Marrying a gorgeous sounding tube pre-amp with solid-state amplification has been a technique for achieving unequaled sound quality in hi-end component audio since the advent of the transistor. While kicking around ideas for our new headphone amp we thought, why not try this same technique in a single component? We built one up and were blown away by the increased detail, clarity, and presence the design offered. The tube hybrid headphone amp was born. Hand assembled using the highest quality parts available the music hall ph25.2 will have you singing along with your favorite artists.

• Neutrik headphone output sockets
• Highly reliable 6N16B tube pre-amp section employing SRPP circuit
• CD and AUX input
• Pre-Amp output
• Audiophile grade CMC RCA sockets ensure no signal loss
• Special low-noise R-core power transformer
• Two buffered headphone outputs incorporating superior TPA6120 opamps
• Precise Alps Type 27 potentiometer with 0.5dB accuracy
• Solid and substantial ½in. brushed alloy fascia
• Voltage switchable
• Available in BLACK

http://musichallaudio.com/ph25-2/
http://www.6moons.com/audioreviews/hifiman6/3.html
Senest rettet af kvik 27. dec 2021, 19:29, rettet i alt 2 gange.
Begrundelse: Opdatering
kvik

Brugeravatar
 
IndlĂŚg: 4718
Tilmeldt: 28. jul 2011, 01:27
Geografisk sted: Norge

Re: Rør, hvis du tør - Abin Audio

IndlĂŚgaf kvik » 3. mar 2014, 19:35

Ipar 1023A ($115)

Ipar 1023A.jpg
Ipar 1023A.jpg (39.22 KiB) Vist 55600 gange

Tube Hybrid Headphone Amplifier / Preamplifier

Ipar 1023A was developed by Abin Audio design house. This compact, complex circuit headphone amp has excellent sound performance and can drive almost all type of headphones on the market very well.


Features:
• Integrate both Preamp and headphone amplifier together, but each have independent volume control.
• 4 sets of RCA audio inputs, independent preamp and headphone output
• Excellent circuit layout with incredible signal/noise ratio; -113db for preamp and -114db for headphone amp
• High grade sealed 50W power transformer for very low noise and interference
• Thick 8mm solid aluminum face panel and 2.5mm back panel.
• Tube buffer stage with GE5670 tube, very sweet tone and eliminate clinical digital sound

• Very high grade parts usage, for good sound performance and reliable long years durability  
• Adjustable gain for headphone amp (-3dB/7dB/15dB/17dB), via dip-switches located under the housing.

• Both 110/120V and 220/240V mode supported for worldwide compatibility


Specifications:
• Power supply:110/120V  - 220/240V selectable
• Outputs: Jack 6.3mm, analog stereo RCA

• Inputs:Analog stereo RCA (x4)
• Preamp distortion:0.143% (5687 tube)  
• Headphone distorsion:0.154% (5687 tube)

• Preamp frequency response:20Hz(-0.4dB) - 20KHz(-0.5dB)
• Headphone frequency response:20Hz(-0.3db) - 20KHz(-0.8dB)
• Preamp S/N:-113.1dB

• Headphone S/N:-114.3dB
• Headphone impedance matching:10-600Ω
• Headphone output power:480mW@32Ω, 220mW@300Ω
• Dimension/Weight:260 x 175 x 50mm ( WDH) / 2.7kg

Measurements: https://www.l7audiolab.com/f/measuremen ... par-1023a/

Available on taobao
Senest rettet af kvik 5. dec 2021, 12:26, rettet i alt 2 gange.
Begrundelse: Opdatering
kvik

Brugeravatar
 
IndlĂŚg: 4718
Tilmeldt: 28. jul 2011, 01:27
Geografisk sted: Norge

Re: Rør, hvis du tør - Linear Tube Audio

IndlĂŚgaf kvik » 6. mar 2014, 00:34

LTA microZOTL MZ2 ($1300-2160)

Linear Tube Audio MZ2.jpg
Linear Tube Audio MZ2.jpg (172.21 KiB) Vist 55312 gange

The successor to David Berning's original micro-ZOTL, the MZ2 continues to offer what Berning intended it to: an introduction to ZOTL technology.

Equally a headphone amplifier, integrated amplifier, and preamp, the MZ2 is considered reference-grade for powering almost any headphone, as a 1 wpc amp for extremely efficient speakers, and as a preamp performing well above its price.

Hand-built by our small team just outside of Washington, DC, each MZ2 involves 12 hours of delicate work, including precise hand-winding of several proprietary components, and several days of burn-in and testing.

While technically an OTL amplifier, not having traditional output transformers, the MZ2 is an entirely different kind of circuit that is able to achieve low output impedance and low-current tube operation, which translates to easy matching to almost any headphone or speaker and a very long tube life. ZOTL technology results in amps with the transparency of OTL without the many limitations of OTL designs: purely tube amplification that achieves a theoretically ideal turns ratio and happily interacts with speakers from 2 to 16 ohms, or above. Headphones from 16 to 600 ohms are powered without any hum.

OPTIONS
• Tube Options - We supply NOS 12SN7 tubes by default. Jumpers on the circuit board allow you to easily switch between 12V and 6V, allowing you to use both 6SN7 and 12SN7 tubes and expanding your tube choices. The 12SN7 and 6SN7 are sonically identical and differ only in their heater voltage. 12AU7 tubes can replace the 12AT7 tubes to lower the gain.

• LPS+ Linear Power Supply - the original microZOTL has a switching power supply, which comes with a basic unit. The linear supply (LPS) is a much better supply utilizing super low ESR caps and a super low noise Belleson regulator. You get better sonics with more dynamics.

• Remote Control - the MZ2 remote uses a motorized version of the Alps Blue Velvet pot, which is also used in the non-remote version. Same pot, same sound. No sonic signal degradation. It uses the Apple TV remote control. It is paired to the unit and controls volume only.

• Dual Preamp Outputs - some users desire dual preamp outputs and no speaker binding post outputs. This option is no charge when ordering an amplifier. Please email us your desire for this option just after ordering your amplifier.

• Tall Tube Cover - this is an optional clear cover for the MZ2 with two 1.5 inch holes above the power tubes to allow for alternative tube types that are either on adapters or are taller than standard 6SN7s and 12SN7s..

SPEAKER RECOMMENDATIONS
LTA amplifier owners have found great enjoyment using their amps with a variety of speaker outside of the below ranges. The below are guidelines, not rules. If you have questions about your specific speakers, chances are someone we know has tried them. Don’t hesitate to reach out with questions about your specific setup. Also, don’t forget we have a 14-day no-questions-asked return policy.

Critical listening environments: 105db sensitivity and above
Smaller rooms / lower volume levels / non-critical listening: 97db sensitivity and above


Features:
• Designed by David Berning - one of the world’s premier amplifier designers
• Hand-made just outside Washington, DC
• External power supply - extremely low noise floor
• Drive high efficiency speakers (95db efficiency or higher) to adequate volume.
• Transparent cover
• Universal voltage power supply or high quality linear power supply
• 3 selectable inputs
• Class A preamplifier output
• Transformer-less design eliminates intermodulation distortion inherent in all transformer designs
• Simulates the correct transformer turns ratio using impedance converter
• Low impedance output easily matches wide range of headphones and speakers
• No heavy power or audio transformers
• Optimized tube life expectancy of 10 - 20 years based on use
• Two-year year warranty (1 year on tubes) (international pays shipping)

Specifications:
• Amplifier class: Push-pull Class A, no feedback
• Sensitivity: 0.6V RMS [full output]
• Output impedance: (measured @ 0.5A, 60 Hz) 2 ohms
• Input impedance: 50k
• Power Supply Input: Auto-switching 100/120/220/240V operation, or linear supply user-switchable between 110/120 and 220/240 (contact us if in need of a 100V linear supply)
• Power Supply Output: 12VDC 2.5 amps
• Hum and noise: minimum 60mV RMS or 90dB below full output (20Hz-20kHz)
• Power consumption from ac power source: 33W
• Power output: with 4-ohm load: 1W, 1% THD, with 14-ohm load: 0.5W, 1% THD
• Channel separation: (4-ohm loads) 46dB, 100Hz-10kHz, (14-ohm loads): 54 dB, 100Hz-10kHz
• Frequency response full power: (4-ohm load) +0, -1dB 10Hz-20kHz, (14-ohm load): +0, -1dB 5Hz-50kHz,
• Voltage gain: (4-ohm load): 10.3dB, (14-ohm load): 12.4dB
• Size amplifier (WHD): 9.5"/24.1cm x 4.75"/12.0cm x 7.875"/19.7cm (including connectors)
• Size linear power supply (WHD): 3.25"/8.26cm x 4.25"/10.8cm x 12"/30.48cm
• Net weight: Amplifier w/switching supply: 5.35 lbs (2.5 kg) - Amplifier w/linear supply: 8.94 lbs (4.1 kg)
• Finish: Aluminum case w/ lexan top. Black or silver front
• Tube complement: 2 x 12AT7 input, 2 x NOS 12SN7 output

https://www.lineartubeaudio.com/products/mz2mz2-s



LTA microZOTL MZ3 ($3700)

LTA microZOTL MZ-3.jpg
LTA microZOTL MZ-3.jpg (685.55 KiB) Vist 40916 gange

The MZ3 is the result of three years of refining our flagship amplifier, the microZOTL MZ2. Listeners can enjoy sonic improvements at every level with significant upgrades across the board: new circuit board material, new volume control technology, upgrades in wire, capacitors, tubes, power supply, and sleek case design.

Wrapped in a new control system that is isolated from the analog signal, the amplifier adds another level of fine tuning with remote control, volume level display, and home theater mode.  In a new, low-resonance aluminum chassis custom-designed by Fern & Roby, the MZ3 contains all of the elements that we found elevates your music to a higher level.

There are several integral component upgrades in the audio circuit for wider soundstage, lower noise floor, and substantially improved musicality. Utilizing ceramic circuit boards for the amplifier, we have built the clearest, cleanest sounding microZOTL yet.

Our digital control system features a display for volume level (0-100) and input selection, as well as a remote-controlled, stepped attenuator for volume control.

At 4x the storage of our original PSU, our linear power supply is more refined, with a premium snap-lock interconnect cable and the elimination of turn on-off thumps.

Additionally, through curation of premium tubes and an extended burn-in period, we ensure the amplifiers’ maximum performance right out of the box.

The microZOTL MZ3 represents the highest expression attainable of the microZOTL technology as a headphone amplifier, a preamplifier, and a 1 watt speaker amplifier in the external power supply form factor of the microZOTL MZ2.


Features
• NEW: Updated Volume Control w/ Adjustable Gain & “Hi-Res” Settings .. Now shipping in all unit is our new 8-bit volume control, which gives you 128dB of total attenuation via 100 individual steps. We use precision thin film Nichrome resistors with low thermal noise and ceramic circuit boards with low dialectric content for the highest level of clarity and transparency. For the ultimate in control, you can activate the “Hi-Res” setting in the menu system, which offers 199 steps to dial in exactly the volume level that works best for you. We’ve also added the ability to adjust the gain via the menu system. This adjusts the volume level to allow for finer low-level attenuation when using sensitive speakers or headphones. There are three settings: 0db (default), -15db, and -30dB.
• Balance Control: 100% channel isolation using stored differences of volume values. Maximum balance differential is 16 steps
• Power Supply: Linear supply user-switchable between 110/120 and 220/240 (100V linear supply available for Japan). Uses dual banks of organic poly ultra low ESR capacitors (4 times MZ2) for over 100KuF of output choke isolated storage. Oversize transformer secured with aluminum and brass mountings (no steel). Regulation is performed using low noise Belleson super regulators. Current transformer controls output protection circuit.
• Power Supply Umbilical Cable: premium low noise shielded cable with silver contact, spring loaded premium XLR connectors
• Remote Control: All functions, including Mute and the configuration menu, are available from the remote, except power on-off and headphone/speaker output selection. Uses an Apple TV remote.  The remote is registered to unit to limit control from unintended remotes. The Right-Left buttons can be configured as balance controls.
• Front Panel Control: Functions include volume, input select, headphone/speaker output select, and amplifier power on-off.
• Auto-save Features: Volume level per input is automatically saved and the unit powers on using the stored volume levels. Balance and all other configuration menu selections are all saved as a global level across all inputs.
• Display Controls: LED array display with on/off 7 second timeout and 16 levels of brightness (white, red, blue, or yellow)
• Home Theater Mode: an input can be selected from configuration menu to set one of the inputs to a high volume level fixed input to allow surround sound device control the volume level

Specificatons
• Inputs: 3 Stereo single ended RCA high quality connectors using sealed, silver contact relay control for a short signal path
• Outputs: Headphone ¼” Phone jack, Dual preamp RCA outputs single ended, Stereo speaker binding posts
• Amplifier class: Push-pull Class A, no feedback
• Sensitivity: 0.6V RMS [full output]
• Output impedance: (measured @ 0.5A, 60 Hz) 2 ohms for headphone and speaker outputs, 50 ohms for preamplifier outputs
• Input impedance: 50k
• Power Supply Output:  12VDC 3 amps
• Hum and noise: minimum 60mV RMS or 90dB below full output (20Hz-20kHz)
• Power consumption from ac power source: approx. 50W
• Power output: with 4-ohm load: 1W, 1% THD, with 14-ohm load: 0.5W, 1% THD
• Channel separation: (4-ohm loads) 46dB, 100Hz-10kHz, (14-ohm loads): 54 dB, 100Hz-10kHz
• Frequency response full power: (4-ohm load) +0, -1dB 10Hz-20kHz, (14-ohm load): +0, -1dB 5Hz-50kHz,
• Voltage gain:  (4-ohm load): 10.3dB, (14-ohm load): 12.4dB
• Size: amp: 9 1/2 inches (24.1 cm)wide, 4 3/4 inches (12.0 cm) tall, 7 7/8 inches (19.7 cm) deep (including connectors)
• Linear Power Supply: 12" (30.48 cm) x 3.25" (8.26 cm) x 4.25" (10.8 cm)
• Net weight: with switching supply: 5.35 lbs (2.5 kg)  - amplifier and external power supply)
with linear supply: 8.94 lbs (4.1 kg)  - amplifier and external power supply)
• Tube complement: 2 premium hand selected 12AT7 input tubes, and two premium hand selected 12SN7 output tubes.  (6SN7s can be used with jumper settings) 12AU7s are often substituted for the 12AT7s to lower the gain if higher headphone output is not required.  

https://www.lineartubeaudio.com/products/microzotl-mz3



LTA microZOTL Preamplifier ($4450-5750)

microZOTL Preamplifier.jpg
microZOTL Preamplifier.jpg (90.58 KiB) Vist 48075 gange

After years of refining and testing the microZOTL circuit, LTA has created the microZOTL Preamplifier. This is the highest expression of the patented microZOTL technology as both preamp and headphone amp in a rack-friendly form factor.

The microZOTL Preamplifier has a beautiful new low-resonance aluminum chassis and offers reference-level sonics through upgraded internal components, shorter signal paths, larger power supply, and a digital control system with LED display. 

Production Updates for 2020
We’ve recently made a few changes to all new production units that make incremental, but important, sonic improvements. The best part? The price remains the same.
• Power transformer upgrade: The power transformer is upgraded to a larger custom transformer with multiple windings to improve isolation, which results in lower noise.
• Coupling cap upgrade: The six coupling caps on the audio board between the tube stages are upgraded to premium Japanese film caps with gold plated OCC leads.
• Gain Level upgrade: We have added the ability to adjust the gain on the preamp via the menu system. There are two settings: 0db (default) and -10db. This adjusts the volume control to allow for finer low-level attenuation when using sensitive speakers or headphones.

Optional Level 2 Upgrades
• Preamp output cap upgrade: The headphone and the preamp outputs have been separated, and different types of output caps, optimized for each output, are installed. The preamp cap is upgraded to a premium Clarity CMR.
• Power supply cap upgrade: The power supply caps and power storage caps on the audio board are changed to Mundorf Mlytic AG capacitors. The total amount of storage is increased by 22,000uF.

Optional Balanced Input Transformer Upgrade
• The balanced input transformer upgrade adds high-quality Lundahl input transformers to the XLR inputs on your microZOTL Preamp. If you have a source with balanced outputs, this upgrade retains all the sonic fidelity of your source and is a worthy upgrade.


Features
• Volume Control: Stepped attenuator constructed of 1025 steps of 50 ohms, with 100 positions selected to provide very fine resolution at the lowest volumes and a logarithmic control for higher volumes . Low noise, precision 1% Vishay Dale resistors and hermetically sealed silver contact relays are used for precise, isolated analog signal attenuation
• Balance Control: 100% channel isolation using stored differences of volume values. Maximum balance differential is 16 steps
• Power Supply: Linear power supply available in 110/120 and 220/240 (100V linear supply available for Japan). Uses dual banks of organic poly ultra low ESR capacitors (4 times MZ2) and premium Nichicon electrolytic for over 100Kuf of output choke isolated storage. Oversize transformer secured with aluminum and brass mountings (no steel). Regulation is performed using low noise Belleson super regulators. Current transformer controls output protection circuit
• Front Panel Control: Functions include volume, input select, headphone/speaker output select, all configuration menu selections, and amplifier power on-off. Capacitive brass touch buttons are utilized for menu control, input selection, tape monitor control and power on-off.
• Remote Control: All functions, including Mute and the configuration menu, are available from the remote, except power on-off.  Uses an Apple TV remote.  The remote is registered to unit to limit control from unintended remotes. The Right-Left buttons can be configured as balance controls.
• Auto-save Features: Volume level per input is automatically saved and the unit powers on using the stored volume levels. Balance and all other configuration menu selections are all saved as a global level across all inputs.
• Display Controls: 16 levels of brightness and on-off selectable 7 second timeout
• Home Theater Mode: an input can be selected from configuration menu to set one of the inputs to a high-volume level fixed input to allow surround sound device control the volume level
• Front Panel Power Switch Override: power switch on front panel can be configured to be set to always on to allow external on-off control for device such as remote-controlled power conditioner

Specifications
• Inputs: 4 Stereo RCA single ended inputs using high quality Cardas connectors and XLR single ended input, with transformer-coupled balanced option with Lundahl transformers. Sealed, silver contact relays utilized in a short signal path. One additional Tape input.
• Outputs: Headphone ¼” Phone jack, dual Cardas RCA single ended preamplifier outputs, and a Tape Monitor output utilizing Cardas RCAs (input level before volume control).
• Amplifier class: Push-pull Class A, no feedback
• Sensitivity: 0.6V RMS [full output]
• Output impedance: (measured @ 0.5A, 60 Hz) 2 ohms for headphone outputs, 50 ohms for preamplifier outputs
• Input impedance: 50k
• Hum and noise: minimum 60mV RMS or 90dB below full output (20Hz-20kHz)
• Power consumption from ac power source: approx. 50W
• Power output: with 4-ohm load: 1W, 1% THD, with 14-ohm load: 0.5W, 1% THD
• Channel separation: (4-ohm loads) 46dB, 100Hz-10kHz, (14-ohm loads): 54 dB, 100Hz-10kHz
• Frequency response full power: (4-ohm load) +0, -1dB 10Hz-20kHz, (14-ohm load): +0, -1dB 5Hz-50kHz,
• Voltage gain: (4-ohm load): 10.3dB, (14-ohm load): 12.4dB
• Size: 17 inches (43.2 cm) wide, 4.2 inches (10.7 cm) tall, 12.4 inches (31.5 cm) deep (including knob and connectors)
• Net weight: 14 lbs. (6.35 kg.) Shipping weight: 22 lbs. (10 kg)
• Tube complement: 2 premium hand selected 12AT7 input tubes, and two premium hand selected 12SN7 output tubes.  (6SN7s can be used with jumper settings). 12AU7s are often substituted for the 12AT7s to lower the gain if higher headphone output is not required.  

https://www.lineartubeaudio.com/product ... eamplifier



LTA Z10e Electrostatic Headphone Amplifier ($6950)

LTA Z10e.jpg
LTA Z10e.jpg (87.45 KiB) Vist 45811 gange

LTA is excited to announce the Z10e Electrostatic Headphone Amplifier. With all the magic, realism, and 3D soundstage of ZOTL technology, the Z10e delivers one of the best electrostatic headphone experiences available. In addition, the Z10e is a full function regular dynamic and planar headphone amplifier and a 12-watt per channel integrated speaker amplifier.

A single component solution, the Z10e incorporates the acclaimed ZOTL10 power amplifier, a Berning-designed preamplifier, and the LTA control system with three inputs – all packaged in a beautiful aluminum low-resonance case designed by Fern & Roby.

The Amplifier
The heart of the Z10e is the highly-acclaimed ZOTL10 power amplifier, using sweet sounding EL84 power tubes providing 12 tube watts per channel. Delivering much higher power than solid state amps with the same power rating, ZOTL tube amplifiers can drive your 90db and above sensitivity speakers to very loud, even “thundering” levels.

The Preamplifier
The amplifier is preceded by the 12AU7 preamplifier circuitry, which was borrowed from one of David Berning’s ultra-premium amplifiers. It features both true balanced and single ended inputs. The preamplifier uses ceramic circuit board material, giving it a premium point-to-point sound quality.

The LTA Control System
The amplifier is wrapped in our new control system featuring: 3 inputs (including one true balanced input), LED dimmable display with configurable time out, LED input indicators, remote controlled stepped attenuation using premium Vishay Dale resistors, and a linear power supply configured with a Belleson regulator for extremely low noise.

Additionally, the Z10e comes equipped with two headphone output jacks: a high output for less sensitive headphones and a low output for very sensitive headphones.

The Volume Control - w/ Adjustable Gain & “Hi-Res” Settings
Now shipping is our new 8-bit volume control, which gives you 128dB of total attenuation via 100 individual steps. We use precision thin film Nichrome resistors with low thermal noise and ceramic circuit boards with low dialectric constant for the highest level of clarity and transparency.

For the ultimate in control, you can activate the “Hi-Res” setting in the menu system, which offers 199 steps to dial in exactly the volume level that works best for you.

We’ve also added the ability to adjust the gain via the menu system. This adjusts the volume level to allow for finer low-level attenuation when using sensitive speakers or headphones. There are three settings: 0db (default), -15db, and -30dB.


SPECIFICATIONS
• Inputs: 2 single-ended RCA stereo inputs, 1 input using two 3-pin combom XLR/TRS jacks
• Speaker Output: 4 speaker binding posts, banana or spade
• Conventional Headphone Outputs: Low: 240mW per channel @ 32 ohms, High: 3W per channel @ 32 ohms
• Electrostatic Headphone Output: 5 pin Stax interface, 580V bias
• Front Panel Controls: Power switch, Input switch, volume control, and headphone / speaker switch
• Remote Control: All front panel functions and configuration menu accessed using an aluminum Apple TV Remote
• Volume Control: 100 stepped attenuator (smallest step 1/1000th of total value) using Vishay Dale 1% precision resistors
• Output impedance: 1.2 ohms
• Power Supply: Linear supply using a Belleson regulator and low ESR poly-organic capacitors
• Input impedance: 47k
• 115VAC or 220-240VAC configured at factory - 50/60Hz - IEC receptacle
• Hum and noise: 94dB below full output (measured at 20Hz-20kHz)
• Power output with 4-ohm load: 13W, 0.5% THD
• Power output with 8-ohm load: 12W, 0.5% THD
• Frequency response (8-ohm load): 6Hz to 60kHz, +0, -.5dB
• Amplifier class: Push-pull Class AB
• Voltage gain (8-ohm load): 18dB
• Amplifier Weight: 18 lbs
• Power Supply Weight: 5lbs
• Amplifier Dimensions: W: 12.75” x D: 14.5” x H: 6.5
• Power Supply Dimensions: W: 4.75” x D: 7.5” x H: 4.25”
• Finish: Aluminum case
• Tube complement: premium NOS two 12AT7s, four 12AU7s, and four EL84s or equivalent
• Home Theater Function can select any input for fixed volume
• Display: 16 Levels of brightness and programmable 7-second time out

https://www.lineartubeaudio.com/product ... grated-amp



LTA Z10 Integrated Amplifier ($4900-5400)

LTA Z10 Integrated.jpg
LTA Z10 Integrated.jpg (101.29 KiB) Vist 40915 gange

LTA is excited to announce the first Berning-designed integrated amplifier. With all the magic, realism, and 3D soundstage of ZOTL technology, the Z10 Integrated amplifier delivers the experience of a live music performance right in your living room.

A single component solution, the Z10 Integrated amplifier incorporates the acclaimed ZOTL10 power amplifier, a Berning designed preamplifier, LTA’s digital control system, and an optional phono preamp – all beautifully packaged in a Fern & Roby designed case.

The Z10 Integrated amplifier offers all the benefits of the output transformer-less ZOTL technology: three times the tube life and one third the heat. With startling realism, plentiful bass, low noise, and gorgeous mids and highs – the Z10 Integrated amplifier is the perfect package.

The brass touch buttons, headphone outputs, easy-to-read, configurable display, and machined aluminum front and rear panels, exude the high quality manufacturing of handmade products in the USA.

The heart of the Integrated Z10 is the highly-acclaimed ZOTL10 power amplifier, using EL-84 power tubes at 12 watts per channel. With the addition of a preamplifier borrowed from Berning’s $30K product, the existing ZOTL circuitry cross-couples to a gain stage, and matches perfectly with the power amplifier.

The amplifier is wrapped in our new control system featuring: 5 inputs (including one true balanced input,) tape in and out, LED dimmable display with configurable time out, LED input indicators, home theater mode, remote controlled stepped attenuation using premium Vishay Dale resistors, and a linear power supply configured with a Belleson regulator for extremely low noise. Additionally, the Integrated Z10 comes equipped with two headphone output jacks: a high output for less sensitive headphones and a low output for very sensitive headphones.

Delivering much higher power than solid state amps with the same power rating, ZOTL tube amplifiers can drive your 90db and above sensitivity speakers to thundering levels with headroom to spare. Providing everything you need except speakers and a source, in a sleek new case, the Integrated Z10 is designed to last a lifetime.


NEW: Updated Volume Control w/ Adjustable Gain & “Hi-Res” Settings
Now shipping in all unit is our new 8-bit volume control, which gives you 128dB of total attenuation via 100 individual steps. We use precision thin film Nichrome resistors with low thermal noise and ceramic circuit boards with low dialectric content for the highest level of clarity and transparency.

For the ultimate in control, you can activate the “Hi-Res” setting in the menu system, which offers 199 steps to dial in exactly the volume level that works best for you.

We’ve also added the ability to adjust the gain via the menu system. This adjusts the volume level to allow for finer low-level attenuation when using sensitive speakers or headphones. There are three settings: 0db (default), -15db, and -30dB.

Specifications
• Inputs: 4 single-ended Cardas RCA stereo, 1 input using two 3-pin XLRs
• Speaker Output: 4 WBT copper speaker binding posts, banana or spade
• Headphone Output: Low: Approx. .5watt per channel at 50 ohms, High: Approx. 2 watts per channel at 50 ohms
• Tape Monitor: 1 stereo tape monitor out, 1 stereo tape monitor in - both Cardas RCA
• Front Panel Controls: 7 brass touch switches (power, input, tape monitor, up, down, menu/select, back), volume control, and headphone speaker switch
• Remote Control: All front panel functions using paired Apple TV Remote (power on programmable)
• Volume Control: 100 stepped attenuator (smallest step 1/1000th of total value) using Vishay Dale 1% precision resistors
• Output impedance: 1.2 ohms
• Input impedance: 47k
• 115VAC or 220VAC configured at factory - 50/60Hz - IEC receptacle
• Hum and noise: 94dB below full output (measured at 20Hz-20kHz) • Carrier: -50dB (460kHz)
• Power output with 4-ohm load: 13W, 0.5% THD
• Power output with 8-ohm load: 12W, 0.5% THD
• Frequency response (8-ohm load): 6Hz to 60kHz, +0, -.5dB
• Amplifier class: Push-pull Class AB
• Voltage gain (8-ohm load): 18dB
• Size: 16 inches wide, 5 1/8 inches tall, 16 inches deep (including connectors)
• Net weight: Amplifier: 18 lbs./8.2 kg
• Finish: Aluminum case
• Tube complement: premium NOS two 12AT7s, four 12AU7s, and four EL-84s or equivalents
• Home Theater Function can select any input for fixed volume
• Display: 16 Levels of brightness and programmable 7-second time out
• Optional Phono Preamp: 46 dB gain for moving magnet cartridges.

https://www.lineartubeaudio.com/product ... -amplifier



LTA Z40+ Integrated Amplifier ($7650-9750)

LTA Z40 Integrated.jpg
LTA Z40 Integrated.jpg (425.09 KiB) Vist 40915 gange

The Z40+ Integrated amplifier offers all the benefits of the output transformer-less ZOTL technology: three times the tube life and one third the heat. With startling realism, plentiful bass, low noise, and gorgeous mids and highs – the Z40+ Integrated amplifier is the perfect package.

The brass touch buttons, headphone outputs, easy-to-read, configurable display, and machined aluminum front and rear panels, exude the high quality manufacturing of handmade products in the USA.

The heart of the Z40+ Integrated is the highly-acclaimed ZOTL40 Reference power amplifier. With the addition of a preamplifier borrowed from Berning’s $30K product, the existing ZOTL circuitry cross-couples to a gain stage, and matches perfectly with the power amplifier.

The amplifier is wrapped in our new control system featuring: 5 inputs (including one XLR input for balanced sources), tape in and out, LED display and input indicators, home theater mode, and remote controlled stepped attenuation using premium Vishay Dale resistors.

The Z40+ Integrated comes equipped with two headphone output jacks: a high output for less sensitive headphones and a low output for very sensitive headphones.

Delivering much higher power than solid state amps with the same power rating, the Z40+ Integrated tube amplifier can drive your 85db and above sensitivity speakers to thundering levels with headroom to spare. Providing everything you need except speakers and a source, in a sleek new case, the Z40+ Integrated is designed to last a lifetime.

NEW: Reference+ version
LTA is proud to announce the next generation of our most powerful flagship integrated amp, the Z40+ Integrated Amplifier.

After trying over two dozen component combinations, and countless hours of listening tests and comparisons, the new Z40+ upgrade improves the tone and texture across all frequencies, and there is more detail and clarity around the performers.

These sonic upgrades are achieved through adding a massive 100,000ÂľF of additional capacitor storage and changing resistors at key points in the audio path to non-magnetic Audio Note Tantalums, each value specifically chosen for their location.

Stereo subwoofer output has also been added. For those who prefer mono subwoofer output, that can be requested at no additional charge.

All new units ship with the Plus+ Upgrades installed. Existing Z40 Integrated amp customers can get all these upgrades via our Z40+ Integrated Amp Upgrade Program.

NEW: Updated Volume Control w/ Adjustable Gain & “Hi-Res” Settings
Now shipping is our new 8-bit volume control, which gives you 128dB of total attenuation via 100 individual steps. We use precision thin film Nichrome resistors with low thermal noise and ceramic circuit boards with low dialectric constant for the highest level of clarity and transparency.

For the ultimate in control, you can activate the “Hi-Res” setting in the menu system, which offers 199 steps to dial in exactly the volume level that works best for you.

We’ve also added the ability to adjust the gain via the menu system. This adjusts the volume level to allow for finer low-level attenuation when using sensitive speakers or headphones. There are three settings: 0db (default), -15db, and -30dB.


Specifiations
• Inputs: 4 single-ended Cardas RCA stereo, 1 balanced input using two 3-pin XLRs
• Speaker Output: 4 WBT copper speaker binding posts
• Tape Monitor: 1 stereo tape monitor out, 1 stereo tape monitor in - both Cardas RCA
• Front Panel Controls: 7 brass touch switches (power, input, tape monitor, up, down, menu/select, back), volume control, and headphone speaker switch
• Remote Control: All front panel functions using paired Apple TV Remote
• Volume Control: 100 stepped attenuator (smallest step 1/1000th of total value) using Vishay Dale 1% precision resistors
• Output impedance: 1.2 ohms
• Input impedance: 47k
• 100V / 120V / 240V operation: Auto-switching
• Hum and noise: 94dB below full output (measured at 20Hz-20kHz)
• Power output with 4-ohm load: 46W, 0.5% THD
• Power output with 8-ohm load: 51W, 0.5% THD
• Frequency response (8-ohm load): 6Hz to 60kHz, +0, -.5dB
• Amplifier class: Push-pull Class AB
• Voltage gain (8-ohm load): 23dB
• Size: 16 inches wide, 5 1/8 inches tall, 16 inches deep (including connectors)
• Net weight: Amplifier: 18 lbs./8.2 kg
• Finish: Aluminum case
• Tube complement: Preamp section: 2x 12AU7, Power section: 2x 12AU7s, 2x 12AT7s, 4x KT77
• Home Theater Function can select any input for fixed volume
• Display: 16 Levels of brightness and programmable 7-second time out

Optional MM or MM/MC Phono Stage:
• MM Gain: 46 db fixed
• MC gain: 10db/20db additional (56 db total or 66 db. selectable by jumpers)
• MM loading: 47K ohms
• MC loading: 10, 20, 30, 50, 100, 200, 470 ohms selectable by dipswitch; 100pf, 220pf, 330pf selectable by dipswitch

https://www.lineartubeaudio.com/product ... -amplifier



LTA ZOTL Ultralinear+ Integrated Amplifier ($7650-9150)

LTA UL Integrated.jpg
LTA UL Integrated.jpg (200.31 KiB) Vist 40915 gange

The ZOTL Ultralinear+ is the latest ZOTL amplifier design by David Berning, utilizing his Zero-hysteresis output transformerless audio design and his unique power supply.

The ZOTL Ultralinear+ amplifier outputs 20 watts per channel using 17JN6 tubes, a Compactron-style TV sweep tube that can't be easily used in traditional transformer-coupled amplifier designs. The ZOTL circuit is able to take advantage of these great-sounding, under-utilized tubes, and in this case, does so in what can be considered the only ultralinear amp without traditional output transformers.

David designed the amplifier specifically for high efficiency speakers. A balance between triode and pentode mode, the ultralinear topology delivers a less forward presentation which is "more pleasing to listen to.” The ZOTL Ultralinear+ delivers accuracy, detail and realism. Pianos sound like pianos. The bass is controlled but fluid. Very transparent, no hum and very dynamic.

The power supply is an advanced switching supply optimized for audio that only David Berning deploys.

All the benefits of ZOTL technology, including 3 times the tube life, 1/3 the heat, a super wide frequency response of 8hz -60Khz, and a under 2 ohm output impedance to play nicely with all speakers, are all included. There is also a sophisticated speaker protection system to prevent damage to the amplifier and speakers if there ever was a tube issue.

Fern and Roby Audio designed the casework featuring front and rear panels milled from slabs of aluminum, Cardas RCAs, WBT copper binding posts, with all markings laser engraved.

NEW: Plus+ Version
LTA is proud to announce the next generation, and first-ever upgrade, of the Ultralinear flagship amp. Introducing, the ZOTL Ultralinear+ Integrated Amplifier.

After trying over two dozen component combinations, and countless hours of listening tests and comparisons, the new ZOTL Ultralinear+ Integrated Amplifier improves the tone and texture across all frequencies, and there is more detail and clarity around the performers.

These sonic upgrades are achieved through adding a massive 100,000ÂľF of additional capacitor storage and changing the resistors in the audio path to non-magnetic Audio Note Tantalum and Holco Metal Film resistors, each type and value specifically chosen for each location.

Stereo subwoofer output has also been added. For those who prefer mono subwoofer output, that can be requested at no additional charge.

All new units ship with the Plus+ Upgrades installed. Existing ZOTL Ultralinear Integrated amp customers can get all these upgrades via our Ultralinear+ Integrated Amp Upgrade Program.

NEW: Updated Volume Control w/ Adjustable Gain & “Hi-Res” Settings
Now shipping is our new 8-bit volume control, which gives you 128dB of total attenuation via 100 individual steps. We use precision thin film Nichrome resistors with low thermal noise and ceramic circuit boards with low dialectric constant for the highest level of clarity and transparency.

For the ultimate in control, you can activate the “Hi-Res” setting in the menu system, which offers 199 steps to dial in exactly the volume level that works best for you.

We’ve also added the ability to adjust the gain via the menu system. This adjusts the volume level to allow for finer low-level attenuation when using sensitive speakers or headphones. There are three settings: 0db (default), -15db, and -30dB.


Specifications
• Inputs: 4 single-ended Cardas RCA stereo, 1 balanced input using two 3-pin XLRs
• Speaker Output: 4 WBT copper speaker binding posts
• Tape Monitor: 1 stereo tape monitor out, 1 stereo tape monitor in - both Cardas RCA
• Front Panel Controls: 7 brass touch switches (power, input, tape monitor, up, down, menu/select, back), volume control, and headphone speaker switch
• Remote Control: All front panel functions using paired Apple TV Remote
• Volume Control: 100 stepped attenuator (smallest step 1/1000th of total value) using Vishay Dale 1% precision resistors
• Output impedance: 1.2 ohms
• Input impedance: 47k
• 100V / 120V / 240V operation: Auto-switching
• Hum and noise: 94dB below full output (measured at 20Hz-20kHz)
• Power output with 8-ohm load: 20W, 0.5% THD
• Frequency response (8-ohm load): 6Hz to 60kHz, +0, -.5dB
• Amplifier class: Push-pull Class AB
• Voltage gain (8-ohm load): 21dB
• Size: 16 inches wide, 5 1/8 inches tall, 16 inches deep (including connectors)
• Net weight: Amplifier: 18 lbs./8.2 kg
• Finish: Aluminum case
• Tube complement: Preamp section: 2x 12AU7, Power section: 2x 12AU7s, 2x 12AT7s, 4x 17JN6s
• Home Theater Function can select any input for fixed volume
• Display: 16 Levels of brightness and programmable 7-second time out

Optional MM or MM/MC Phono Stage:
• MM Gain: 46 db fixed
• MC gain: 10db/20db additional (56 db total or 66 db. selectable by jumpers)
• MM loading: 47K ohms
• MC loading: 10, 20, 30, 50, 100, 200, 470 ohms selectable by dipswitch; 100pf, 220pf, 330pf selectable by dipswitch

https://www.lineartubeaudio.com/product ... -amplifier
Senest rettet af kvik 25. dec 2021, 22:36, rettet i alt 6 gange.
Begrundelse: Opdatering
kvik

Brugeravatar
 
IndlĂŚg: 4718
Tilmeldt: 28. jul 2011, 01:27
Geografisk sted: Norge

Re: Rør, hvis du tør - Ultrasone

IndlĂŚgaf kvik » 6. mar 2014, 00:38

Ultrasone Volcano (€19000)

Ultrasone Volcano.jpg
Ultrasone Volcano.jpg (278.55 KiB) Vist 22428 gange

THE ULTRASONE VOLCANO
A tube amplifier of highest class. After years of development, we are proud to present our first tube amplifier:
the ULTRASONE Volcano.
Selected components, the finest materials and – typical for ULTRASONE – discrete design make the Volcano an amplifier for eternity.

SUSTAINABILITY WITHOUT REGRET
We love music – and we want many more generations to be able to share this feeling with us. This is reflected in the development of our products. Reducing the mass production instead developing the highest quality device.
This amplifier is built to last. We want to underline this with a lifetime warranty. Military technology and high-end audio components combined in a 7.55 kg tube amplifier as a sound miracle without sacrificing style. This is what defines the ULTRASONE Volcano.

ELEGANT, POWERFULL UND WARM-HEARTED
The ULTRASONE Volcano offers you exactly that. A tube amplifier which, with its elegant, timeless design, turns its modesty into a statement.
Parallel running outputs ensure that you can share the enjoyment of music with your partner. Thanks to the tube technology, which is based on military standards, the Volcano creates the finest sounds that raise the acoustic experience to a level that has never been heard before.


TECHNICAL DATA
• Frequency Transmission: 3 Hz – 100 KHz 
• Power Output: 600 mW
• Total Harmonic Distorsion (THD): 0,3% (300 Ohm/ 100mW)
• Output Impedance: 32 – 600 Ohm
• Output Connectors: Jack 6.3 mm asymmetrical, XLR, Pentaconn symmetrical
• Supply Voltage: 230V or 115 V
• Maximum Power Consumption: 60W
• Weight: 7,55 kg
• Lifetime Warranty

https://ultrasone.com/volcano/?lang=en
Senest rettet af kvik 8. jan 2022, 17:56, rettet i alt 4 gange.
Begrundelse: Opdatering
kvik

Brugeravatar
 
IndlĂŚg: 4718
Tilmeldt: 28. jul 2011, 01:27
Geografisk sted: Norge

Re: Rør, hvis du tør - Wells Audio

IndlĂŚgaf kvik » 6. mar 2014, 00:40

Wells Audio Dragon (L1 $1500, L2 $2500, L3 $5500)

Wells Audio Dragon.jpg
Wells Audio Dragon.jpg (5.24 MiB) Vist 15058 gange

The list of design criteria was long one for the new Dragon amplifiers. The goal was no less than to match the legendary performance levels of the Milo and Headtrip solid state headphone amplifiers at even lower price points with the addition of the incorporation of the musicality of tubes in the design. We started with a list of features that we felt were absolutely required in a product that we wanted to put the Wells Audio name on. First, and an absolute necessity was the ability to drive any headphones on the market regardless of load. It had to also have gain adjustability to work optimally with the most efficient to the least efficient headphones on the market. the ability to use multiple types of tubes as well as have multiple ground settings to maximize noise reduction was also included. The Dragon has a tube gain stage followed by a extremely low noise solid state gain stage. This results in the beauty and attributes of tubes with the current to drive hard-to-drive headphone loads in a way no all tube amplifier can match. The Dragon puts out up to 5 watts of power with up to 1 amp of current drive. This results in a musical presentation that is extremely powerful and quiet with state-of-the-art levels of dynamics, separation, soundstage size, image density, resolution with the anticipated accompaniment of tube harmonics, timbre, linearity and tonal beauty. The Dragon is the most fully realized design yet from Wells Audio and is built in a designed in a modular manner to easily incorporate further levels of further sonic upgrades. There is currently the base Dragon model, followed by the Level II and the Level III.

Dragon features:
• Up to 8 different switchable gain settings
• 4 switchable ground settings
• .500 milliamps of gain
• Choice of 12BH7 or 6DJ8 tubes
• All wire and PCBs are cryogenically treated
• XLR inputs are standard
• Premium Rike S-cap2 output coupling caps used

Dragon Level II Features in addition to Level I:
• Bybee AC Noise Filters
• Upgraded 17v power supply
• Power increase to 1 amp of current

Dragon Level III upgrades in addition to the Level II:
• 4 Wells Audio proprietary DC Noise Filters
• Mundorf capacitors in tube gain stage filter caps
• Khozmo Opto Sensor attenuator
• Upgraded 17v power supply with film bypass treble and midrange caps and hexfred diodes
• Hexfred diodes instead of fast diodes in solid state gain stage
• WBT RCA inputs
• Furutech IEC
• Cryogenically treated tubes
• Solid aluminum billet feet and attenuator knob
• Chrome tube guards
• Upgraded Rike copper foil, polyproylene, paper-in-oil output coupling caps

Dragon Specifications
• Input impedance: 25k
• Output Impedance: 1 ohm @ 500mV out
• Signal-to-Noise-Ratio: 93dB, unweighted
• Noise Floor: <200mV, 10Hz to 100kHz
• Crosstalk, 4-pin jack: -88dB @ full output into 32 ohms (1kHz)
• Crosstalk, 6.3mm jack: -68 dB @ full output into 32 ohms (1kHz)
• Frequency Response: -0.1dB @ 20kHz,—0.5dB @ 20Hz
• Power Output into 10 ohms: 1.5W (3.9V)
• Distortion into 10 ohms: 085% @ 1.5W, .006% @ 1V output
• Power Output into 32 ohms: 2.4W (8.8V)
• Distortion into 32 ohms: 0.22% @ 2.4W, .01% @ 1V output
• Power Output into 600 ohms: 200mW (11V)
• Distortion into 600 ohms: 0.23% @ 200mW, .008% @ 1V output
• Power Consumption at Idle: 310mA @ 120VAC
• Input Sensitivity: 250mV in for 5.6V out (12BH7 set to 18dB)
• Gain Options with 12BH7: 0dB, 6dB, 12dB, 18dB (tube gain only)
• Gain Options with 6DJ8: 6dB, 12dB, 18dB, 24dB (tube gain only)
• Grounding Option, All Models: Direct, Capacitive, Resistive, Parallel RC
• Dimensions (WDH): 10.5 x 16 x 8 inches

http://www.wellsaudio.com/dragon
https://www.head-fi.org/showcase/wells- ... gon.25614/
Senest rettet af kvik 8. jan 2022, 20:24, rettet i alt 5 gange.
Begrundelse: Opdatering
kvik

Brugeravatar
 
IndlĂŚg: 4718
Tilmeldt: 28. jul 2011, 01:27
Geografisk sted: Norge

Re: Rør, hvis du tør - Sinus Audio

IndlĂŚgaf kvik » 6. mar 2014, 01:36

NOTE: Prices mentioned are indicative only, sources are Allegro and Facebook, as Sinus website doesn't state any prices. The enclosure appears to be now available in two versions, Standard (laser cut, powder coated) and ProAudio (+alu front and rear panels). Previously the enclosure could be ordered in any RAL colour, the website doesn't state whether this is still the case. Supplied tubes are also no longer stated, neither whether tubes are included at all. ProAudio generally indicates: Alu front/rear panel, extra inputs/outputs, better sockets/connectors, better audio path cables



Sinus Audio OTL 6N6P (€315)

Sinus Audio OTL 6N6P.jpg
Sinus Audio OTL 6N6P.jpg (287.48 KiB) Vist 40820 gange

Features
• OTL headphone amplifier 6N6P and ECC82 (12AU7)
• Ogonowski EI84/42 transformer, annealed core, 0.3mm laminations
• Active anode voltage filtration and switch-on anode voltage delay
• Point-to-point wiring for amplifer part, PCB for power supply part
• Mundorf EVO Oil, Nichicon, and Mundorf Mcap capacitors for amplifier
• Rubycon and Jantzen foil capacitors for power supply
• Vishay resistors (1%), ALPS Blue potentiometer, Neutrik socket, CMC connectors

Specifications
• Input impedance: 50 kOhm
• Frequency Response: 5Hz - 500kHz (-3dB) (100 Ω)
• Optimal headphone impedance: 100Ω - 600Ω
• Connectors: RCA input, 6.3mm Jack output
• Tubes: 6N6P NOS, ECC82 RFT
• Enclosure: Laser-cut, powder-coated.

Optional
• Enclosure available in any RAL colour (lead time 4-5 weeks)
• Tubes and coupling capacitors from other manufacturers on request

Alternative versions
• OTL 6N6P ProAudio €380
• DualMono OTL 6N6P €425



Sinus Audio OTL 6N13S (€480)

Sinus Audio OTL 6N13S.jpg
Sinus Audio OTL 6N13S.jpg (969.22 KiB) Vist 40820 gange

Features
• OTL headphone amplifier 6N13S and ECC82 (12AU7)
• Ogonowski EI84/42 transformer, annealed core, 0.3mm laminations
• Active anode voltage filtration and switch-on anode voltage delay
• Point-to-point wiring for amplifer part, PCB for power supply part
• Mundorf EVO Oil, Nichicon, and Mundorf Mcap capacitors for amplifier
• Rubycon and Jantzen foil capacitors for power supply
• Vishay resistors (1%), ALPS Blue potentiometer, Neutrik socket, CMC connectors

Specifications
• Input impedance: 50 kOhm
• Frequency Response: 7Hz - 600kHz (-3dB) (32 Ω)
• Headphone impedance range: 32Ω - 600Ω
• Connectors: RCA input, 6.3mm Jack output
• Tubes: 6N13S NOS, ECC82 RFT
• Enclosure: Laser-cut, powder-coated.

Optional
• Enclosure available in any RAL colour (lead time 4-5 weeks
• Tubes and coupling capacitors from other manufacturers on request

Alternative versions
• OTL 6N13S ProAudio €785
• OTL 6AS7 ProAudio €770
• DualMono OTL 6080 €675
• DualMono OTL 6N13S €610
• DualMono OTL 6N13S XLR €?
• DualMono OTL 6N13S ProAudio €?

https://hifizone.pl/sinusaudio-6n13s-re ... hawkowego/



Sinus Audio OTL 6AS7 ProAudio (€785)

Sinus Audio OTL 6AS7 ProAudio.jpg
Sinus Audio OTL 6AS7 ProAudio.jpg (200 KiB) Vist 14886 gange

• OTL headphone amplifier 6AS7 and 5751
• Nominal output power: 2 x 400 mW / 32 Ω
• 2 line inputs and 1 preamp output
• Ogonowski EI84/42 transformer, annealed core, 0.3mm laminations
• Active anode voltage filtration and switch-on anode voltage delay
• Point-to-point wiring for amplifer part, PCB for power supply part
• Solid-core 1×1,3mm2 silver plated PTFE teflon audio wiring
• Mundorf EVO Oil, Nichicon, and Mundorf Mcap capacitors for amplifier
• Rubycon and Jantzen foil capacitors for power supply
• Vishay and DALE resistors (1%), Ohmite Audio Gold cathode resistors (6N13S)
• ALPS Blue potentiometer, Teflon noval and octal sockets
• Neutrik gold socket, CMC connectors, Furutech gold socket
• ALU 10mm front and rear panels

http://highfidelity.pl/@main-3782&lang=

NOTE: OTL 6N13S ProAudio and OTL 6AS7 ProAudio likely share the same design (apart from tubes)



Sinus Audio Dual Mono OTL 6N13S Headphone Amplifier (€610)

Sinus Audio Dual Mono OTL 6N13S.jpg
Sinus Audio Dual Mono OTL 6N13S.jpg (362.88 KiB) Vist 14886 gange

Features
• Dual Mono OTL 6N13S and ECC82 (12AU7)
• Ogonowski EI84/42 transformer, annealed core, 0.3mm laminations
• Active anode voltage filtration and switch-on anode voltage delay
• Point-to-point wiring for amplifer part, PCB for power supply part
• VALAB silver plated copper (18AWG) for internal wiring
• Mundorf EVO Oil, Nichicon, and Mundorf Mcap capacitors for amplifier
• Rubycon and Jantzen foil capacitors for power supply
• DALE resistors (1%), Ohmite Audio Gold Resistors (as 6N12S cathode resistors)
• ALPS Blue potentiometer, CMC RCA connectors, Neutrik headphone jack
• Teflon Noval and Octal sockets

Specifications
• Input impedance: 50 kOhm
• Frequency Response: 7Hz - 600kHz (-3dB) (32 Ω)
• Headphone impedance range: 32Ω - 600Ω
• Connectors: RCA input, 6.3mm Jack output
• Tubes: 6N13S NOS, ECC82 EH
• Enclosure: Laser-cut, powder-coated.

Optional
• Enclosure available in any RAL colour (lead time 4-5 weeks
• Tubes and coupling capacitors from other manufacturers on request



Sinus Audio DualMono OTL 6C4C (€?)

Sinus Audio DualMono OTL 6C4C.jpg
Sinus Audio DualMono OTL 6C4C.jpg (110.03 KiB) Vist 14886 gange

Features
• Dual Mono OTL 6C4C and ECC82 (12AU7)
• Ogonowski EI84/42 transformer, annealed core, 0.3mm laminations
• Active anode voltage filtration and switch-on anode voltage delay
• Point-to-point wiring for amplifer part, PCB for power supply part
• VALAB silver plated copper (18AWG) for internal wiring
• Mundorf EVO Oil, Nichicon, and Mundorf Mcap capacitors for amplifier
• Rubycon and Jantzen foil capacitors for power supply
• DALE resistors (1%), Ohmite Audio Gold Resistors (as 6C4C cathode resistors)
• ALPS Blue potentiometer, teflon Noval and Octal sockets
• CMC RCA connectors, Neutrik headphone jack

Specifications
• Input impedance: 50 kOhm
• Frequency Response: 7Hz - 600kHz (-3dB) (32 Ω)
• Headphone impedance range: 32Ω - 600Ω
• Connectors: RCA input, 6.3mm Jack output
• Enclosure: Laser-cut, powder-coated.

Optional
• Enclosure available in any RAL colour (lead time 4-5 weeks)
• Optional: Tubes and coupling capacitors from other manufacturers on request.



Sinus Audio OTL 2A3 ProAudio (€1220)

Sinus Audio OTL 2A3 ProAudio.jpg
Sinus Audio OTL 2A3 ProAudio.jpg (156.24 KiB) Vist 14886 gange

Mains transformers: Toroidy Supreme
Interstage capacitors: KFPM01 Miflex
Output capacitors: Rubycon + Mundorf Aluminum Oil
Power supply capacitors: Rubycon + foil Jantzen
2A3 cathode resistors: Ohmite Audio Gold Resistors
Resistors: DALE 1%
12AU7 filament stabilization: LD1085 voltage regulator
2A3 filament stabilization: LD1085 voltage regulator
Anode power supply: Active filtration + anode voltage stabilization system
Anode voltage switch-on delay
Teflon sockets for 2A3 and 12AU7
Volume control: Blue ALPS
RCA sockets: CMC
230V mains socket: Furutech Gold
Audio cables: Solid-core 1×1,3mm2 silver-plated PTFE Teflon
100mA meters for 2A3 bias measurement
Rear plate: ALU 10mm
Front plate: ALU 10mm
Amplifier assembly: point to point
Power supply assembly: PCB
Inputs: 2x Line-in (RCA)
Outputs: 1x Pre-out (RCA)), 1x Headphone-out (1/4" Jack)
Power: 2x 260mW (32Ohm) / 2x 360mW (250Ohm)

Alternative versions
• OTL 2A3 6SN7 ProAudio €1240
• DualMono OTL 300B 6SN7 €?



http://www.sinusaudio.pl/#ofirmie



Sinus Audio Collage.jpg
Sinus Audio Collage.jpg (959.71 KiB) Vist 14886 gange
Senest rettet af kvik 4. jan 2022, 23:10, rettet i alt 3 gange.
Begrundelse: Opdatering
kvik

Brugeravatar
 
IndlĂŚg: 4718
Tilmeldt: 28. jul 2011, 01:27
Geografisk sted: Norge

Re: Rør, hvis du tør

IndlĂŚgaf Claus-DK » 6. mar 2014, 01:39

Fantastisk trĂĽd..
Tusind tak fordi du har brugt tid og krĂŚfter pĂĽ denne trĂĽd, den er noget ganske sĂŚrligt..
Claus-DK

Brugeravatar
Administrator
 
IndlĂŚg: 12664
Tilmeldt: 1. apr 2011, 12:57
Geografisk sted: Kliplev

Re: Rør, hvis du tør

IndlĂŚgaf Burning777 » 6. mar 2014, 12:31

Det er jo helt vildt hvad der findes i denne kategori. Det er da noget af et arbejde, der ligger bag at samle alle disse i denne trĂĽd.
Desktop: Meier Daccord ff --> Meier Classic ff --> Beyerdynamic DT-1770 Pro
Portable: iPod Classic --> CLAS --> Meier Quickstep --> Etymotic ER4XR / Beyerdynamic T51p / Tzar 350
Burning777

Brugeravatar
headphoneus supremus extraordinaire
 
IndlĂŚg: 3909
Tilmeldt: 2. apr 2011, 07:58
Geografisk sted: Herning

Re: Sv: Rør, hvis du tør

IndlĂŚgaf sonder » 6. mar 2014, 13:11

Tak for indsatsen Ketil.. trĂĽden inspirerede mig til en Maestral II :-)
Udstyr: PC -> Windows Server 2012 -> Foobar -> Audio GD DI 2014 -> Hegel HD 25 -> Auralic Taurus MK2 -> Audeze LCD2 (fazor)
sonder

 
IndlĂŚg: 185
Tilmeldt: 21. apr 2012, 14:49
Geografisk sted: Aalborg

Re: Rør, hvis du tør - Heaven 11 Audio

IndlĂŚgaf kvik » 6. mar 2014, 17:54

Heaven 11 Billie Amp ($1650)

Heaven 11 Billie Amp.jpg
Heaven 11 Billie Amp.jpg (540.38 KiB) Vist 45938 gange

Billie is a high-performance stereo receiver made for the way we listen to music today.

Named after Jazz icon Billie Holiday, Billie features 6 inputs, ICEpower amplification by Bang & Olufsen, a tube preamp, Hi-Res DAC, AptX Bluetooth, optical, analog line and vinyl inputs.

By combining the analog warmth of tubes to the precision of digital, Billie achieves a wide dynamic soundstage, a rich mellow delivery and unrivalled bass performance.

All outputs go through the tube gain stage (even the sub/line out). The tube preamp is active, not just a tube buffer. The headphone out also use a dedicated headphone amp, the TPA6110A2.

Devices are easily paired using AptX. No WiFi or passwords necessary. The integrated Hi-Res DAC ensures that every bit of your digital music is faithfully reproduced.

Made of a solid aluminium chassis, hand-crafted wood knobs and premium parts, Billie is built to last. Manufactured in Montreal, Canada, a 5 year warranty comes standard.



• Power: 120 watts RMS @ 4Ω / 60 watts RMS @ 8Ω
• Amplifier: Class D ICEpower
• Preamp: Class A/B tube preamplifier, JJ ECC99 tubes [12BH7 compatible]
• Input voltage: 120-240 V / 50-60 Hz [factory set, not user-selectable]
• Analog inputs: 1 x Vinyl in (MM); 2 x RCA in
• Digital inputs: 2 x Optical S/PDIF
• Wireless input: aptX audio streaming over Bluetooth / AAC on iOS
• DAC: ESS 9018K2M DAC / 32bit-192KHz
• Headphone: 1 x 1/8″ (3.5mm) - 150mW@16Ω, 90mW@32Ω
• Speaker output: 1 x speaker pair: 5 way binding post
• Pre/Sub output: 1 x volume-controlled pre out [for subwoofer or active speakers]
• Dimensions: 14.25″ x 8″ x 2.75″ /36.2cm x 20.3cm x 7cm
• Weight: 12 pounds / 5.4 kilos
• Included accessories: Power cord, Remote, Manual
• Warranty: 5 year warranty

https://heaven11audio.com/billie-stereo ... f3f489a005
https://www.soundstagehifi.com/index.ph ... lifier-dac
Senest rettet af kvik 18. dec 2021, 19:48, rettet i alt 3 gange.
Begrundelse: Opdatering
kvik

Brugeravatar
 
IndlĂŚg: 4718
Tilmeldt: 28. jul 2011, 01:27
Geografisk sted: Norge

Re: Rør, hvis du tør - Oswalds Mill Audio

IndlĂŚgaf kvik » 6. mar 2014, 18:03

OMA Parallax PL519 ($11000)

OMA Parallax PL519.jpg
OMA Parallax PL519.jpg (723.26 KiB) Vist 45943 gange

You could say there are two lines of sight in audio amplification. One route combines high power amplifiers with low efficiency loudspeakers. Our way is different. We created Parallax PL519 as a low power single ended amp to be used with high efficiency loudspeakers. The result is a truly startling level of naturalness, detail, and ease, something not found in audio equipment today.

Parallax is unique in using a little known and very special tube, not technically a triode at all. This tube, the PL519, was a European television sweep tube, built with extreme ruggedness and durability for long term operation. It was never intended to be used as an audio tube. By reconnecting the internal elements of the PL519 in an operation we call Screen Mode, OMA has effectively created a whole new triode tube.

The Parallax is constructed with OMA's typical attention to materials, workmanship, and design ethos. The two chassis are constructed from solid Pennsylvania walnut by hand, as the joinery shows, and finished with a hand rubbed oil and wax finish. The amp itself is built on heavy sheets of steel which are powder coated, and then covered with a slate top plate, which is also an excellent resonance damping device. Unlike many manufacturers who produce a two chassis "monobloc" configuration, the power supply of Parallax is built on one chassis, and the signal is built onto the other. The robust, isolated power supply ensures that the output power of the Parallax exceeds what one expects of an amplifier rated at less than 5 watts.

Dimensions W 19" x D 14" x H 8"

February 2018: New version of our dual chassis Parallax amplifier, You can now use your headphones with it!



https://oswaldsmillaudio.com/parallax


NOTE: Price is likely outdated.
Senest rettet af kvik 27. dec 2021, 23:39, rettet i alt 2 gange.
Begrundelse: Opdatering
kvik

Brugeravatar
 
IndlĂŚg: 4718
Tilmeldt: 28. jul 2011, 01:27
Geografisk sted: Norge

Re: Rør, hvis du tør - Riviera Audo Laboratories

IndlĂŚgaf kvik » 6. mar 2014, 18:48

Riviera AIC10-Bal (€16000)

Riviera AIC-10.jpg
Riviera AIC-10.jpg (1.02 MiB) Vist 48748 gange

Headphone/Integrated Amplifier. Drives any headphone with ease. Suitable for medium sensitivity speakers in domestic environments.

• 10 + 10W power (8 ohms)
• Zero Feedback
• Pure Class A
• Hybrid design (Triode, BJT, Mosfet)
• 3 line inputs (XLR x1, RCA x2)
• 2 headphone outputs (4-pin XLR and 6.3mm Jack)
• Front panel speaker/headphone selector
• High/Low headphone impdedance selector
• Dimensions: 26×43.5×14.5h cm.
• Weight: 14.4 Kg

https://www.rivieralabs.com/en/products ... aic10-bal/
https://musicalhead.de/2018/05/31/test-riviera-aic10/
http://www.6moons.com/audioreviews2/riviera/2.html



Riviera AFC10 (€14000)

Riviera AFC-10.jpg
Riviera AFC-10.jpg (209.82 KiB) Vist 48748 gange

Headphone/Power Amplifier. Drives any headphone with ease. Suitable for medium sensitivity speakers in domestic environments. No preamp function.

• 10 + 10W power (8 ohms)
• Zero Feedback
• Pure Class A
• Hybrid design (Triode, BJT, Mosfet)
• 1 line input (RCA)
• 2 headphone outputs (4-pin XLR and 6.3mm Jack)
• Front panel speaker/headphone selector
• High/Low headphone impdedance selector
• Dimensions: 26×43.5×14.5h cm.
• Weight: 14.4 Kg.

https://www.rivieralabs.com/en/products ... ics/afc10/
http://www.rivieralabs.com/wp-content/u ... AFC-10.pdf



Riviera Levante (€19000)

Riviera Levante.jpg
Riviera Levante.jpg (349.23 KiB) Vist 22428 gange

Integrated Amplifier, Hybrid, Zero Feedback, Class A or Class AB.

The amplifier is designed for optimal driving of all types of speakers.

In addition to the elements that distinguish the Riviera amplifiers (Hybrid Circuit and Zero Feedback), the LEVANTE integrated circuit has a feature that makes it unique: the possibility to choose between pure Class A and Class AB operation. A switch on the front allows you to select the operating class according to your preferences or needs.

In Class A mode it offers 2x30W into 8 ohms (2x60W into 4 ohms); in Class AB it offers 2x120W into 8 ohms (2x200W into 4 ohms). It should be noted that, even in this mode, the first 6 Watts are in Class A.


• Class A / Class AB switch
• Power in Pure Class A 2x30W into 8 ohm
• Class AB power 2x120W into 8 ohm (2x200W into 4 ohm)
• Zero Feedback
• Hybrid circuit
• 1 balanced line input (XLR)
• 4 unbalanced line inputs (RCA)
• Speaker and headphone outputs
• Optional phono card
• Remote controller
• Dimensions: 44x49x19.5 (h) cm.
• Weight: 30 Kg.

https://www.rivieralabs.com/en/products ... s/levante/



CONCEPT

At the heart of each Riviera product lies years of research: from the study of non-conventional circuits to specialized manufacturing.

At the root of every new project lies a wealth of research regarding the selection of the highest quality materials to ensure maximum reliability and quality, the production strictly controlled at every phase to guarantee that every component in a Riviera unit is used to its fullest potential to ensure a final product that is second to none in today’s market.

It’s an open secret to every serious audio designer that relying on traditional measurements does not necessarily guarantee audio nirvana; that is why Riviera places such importance in listening to its amplifiers.

In fact, Riviera restarts from the basics and takes great pride in having studied the literature of electroacoustic written in the last hundred years. It was necessary to redefine the electrical characteristics of an audio amplifier. Riviera’s benchmark remains the live listening experience: Riviera’s philosophy is that a Hi-Fi system must be able to reproduce a sound event which is the closest possible to what a listener would hear in a live context.

To achieve these goals Riviera has made specific choices regarding circuitry and applied technologies:

• Zero Overall Feedback
• “Class A” amplification at every stage
• Hybrid circuitry, with valves (triodes) for signal processing and solid state (BJT and Mosfets) for the power stage
• Electrical values chosen by listening

Riviera is the true expression of the ‘Made in Italy’ brand: where innovation and design are matched to an unparalleled level of excellence.


FEATURES

We use the absolutely best available ECC82 today that is in conformity with Rohs and CE regulations. But if you want to really push performance, feel free to use compatible new-old stock. We cannot really officially say that customers are better off substituting our tube, but it's a fact that an NOS Mullard, RT, Philips Miniwatt or RCA black-plate clear top are better than anything produced and legally sellable today.

The PSU was carefully designed not just for raw power but sound. It's about 200VA; sufficient for a 10wpc amp we think. Five power supplies use two transformers, one for pure audio circuits, the other for control and operational services. The tube branch is pi-filtered and stabilized. The power branch uses another pi filter and a 'distributed capacitance' technique. Instead of two big slow capacitors, we prefer many small fast caps, with the last one extremely close to each power transistor. And there are no protection circuits, only fuses on the power rails. Key for the signal path is no global feedback anywhere and just minimal local. The single-ended ECC82 voltage amplifier uses none whatsoever and that stage wholly determines the amp's sonic character. The complementary outputs mix BJT and Mosfet and require no phase splitter or transformer. The motorized Alps sits at the very input before the first stage.

About our manufacture, all mechanical parts are sourced from suppliers who specialize in aerospace and optical mechanics. They operate in the aerospace sector of Naples, one of Italy's most important. They are used to producing short runs with very high quality control. We design all of our PCB with 2mm rather than standard 1.6mm thickness. They are two-sided and with thrice the usual thickness of copper traces and gold plating. Our solder masks are transparent and the boards are populated manually. Many of our parts are extreme-quality industrial types selected for their sound quality because certain audiophile parts are often not that reliable. And the transformers too are our proprietary design and hand-made in Italy.

Finally a few hard specs. Sensitivity is 400mV relative to 10W/8Ί. Input impedance is 50kΊ. Bandwidth at 1 and 10 watts is 11Hz-55kHz -1dB. At -3dB, it's 7Hz-105kHz. Residual noise is 95¾V A-weighted. SN/R is 99.7dB A-weighted. Power consumption is 110VA.
Senest rettet af kvik 30. dec 2021, 12:44, rettet i alt 2 gange.
Begrundelse: Opdatering
kvik

Brugeravatar
 
IndlĂŚg: 4718
Tilmeldt: 28. jul 2011, 01:27
Geografisk sted: Norge

Re: Rør, hvis du tør - Paltauf Audio

IndlĂŚgaf kvik » 22. mar 2014, 00:10

Paltauf HPA-100 (€3590)

Paltauf HPA-100.jpg
Paltauf HPA-100.jpg (82.49 KiB) Vist 30552 gange

Rousing dynamics, abundant power, enormous richness of detail, phenomenal three-dimensionality, physical representation of the music action - all these qualities are offered by our latest headphone amplifier for all headphones except electrostatic models. The HPA-100 is derived from our HPI-100, a hybrid amplifier that combines the best characteristics of the tube - clean, fast and dynamic signal processing combined with natural warm sound - with those of modern MOSFETs with their linear output characteristics and the capability of high current delivery.

As an alternative, the HPA-100 is also available with loudspeaker connections as the HPA-100 SP version.


Features
• Signal voltage amplification with tubes - Responsible for a natural, lively sound image due to high dynamic range with very low distortion.
• Balanced output stage - With complementary lateral MOSFETs: very broadband, high current capability, lowest distortion.
• Power supply - Elaborate power supply with voltage stabilizers for each amplifier stage - "three" stabilizers for the audio circuitry, own independent power supply for the control functions. Switching power supply, developed for audio applications, for the output stages. (Switching power supply for 400 Watt)
• Processing - High quality of all components, e.g. 1% and 0.1% precision resistors, highest quality film capacitors in the signal path, 105° electrolytic capacitors with high durability in the power supply, circuit boards with optimized conductor path.

Specifcations
• Max. Output voltage: 70 Vpp (1W@600Ω / 5.4W@120Ω / 20W@32Ω / 35W@15Ω / 70W@8Ω)
• Frequency response: 10 Hz to 100,000 Hz (±0dB)
• Inputs: 2x Stereo high level inputs Cinch, 1x Stereo high level input XLR balanced
• Outputs: 1x output XLR 4-pin, 1x output stereo jack 6,35mm
• Dimensions (DWH): 36x24x10 cm

https://paltauf.com/index.php/en/kopfho ... er/hpa-100



Paltauf KHV-ES (€3990)

Paltauf KHV-ES.jpg
Paltauf KHV-ES.jpg (218.49 KiB) Vist 30552 gange

For lovers of electrostatic headphones we have developed our lattest amplifier based on tubes. The almost perfect characteristics of the tube as a voltage amplifier make it the first choice for effortlessly providing high and low-distortion signal voltages. The tubes in this unit are supported by modern semiconductors in their outstanding characteristics  for natural music reproduction.

Features
• Signal voltage amplification with tubes - Responsible for a natural, lively sound image due to high output capability with very low distortion
• Push-pull output stage - With EL84 power tubes, matched in a quartet, switched as a triode
• Power supply - Complex power supply with voltage stabilization for each amplifier stage
• Processing - High quality of all components, e.g. 1% and 0.1% precision resistors, top-quality film capacitors in the signal path, 105° electrolytic capacitors with long service life in the power supply, circuit boards with optimized conductor path.

Specifications
• Frequency response: 5 Hz (-3db) to 60,000 Hz
• Harmonic distortion on 100 Vrms, 1 KHz: < 0,040 % THD
• Maximum output voltage: 370 Vrms on 1 KHz and 1 % THD (Stax SR-007: 111 dB, Stax SR-L700/SR-009: 112 dB)
• Inputs: 2x Stereo high level inputs Cinch, 1x Stereo high level input XLR balanced
• Outputs: 1x output 5 pole, Pro Bias, 1x output 6 pole Normal Bias
• Dimensions (DWH): 34x38x14 cm
• Cabinet with 10mm front in natural or black aluminium with oiled wooden side panels

https://paltauf.com/index.php/en/kopfho ... ker/khv-es



Paltauf KHV-ESD (€4490)

Paltauf KHV-ESD.jpg
Paltauf KHV-ESD.jpg (85.91 KiB) Vist 30552 gange

This amplifier offers the possibility to use either electrostatic or electrodynamic headphones in best quality. A transformer in the output of the unit converts the high signal voltage into a powerful output signal that can drive even demanding electrodynamic headphones with ease. This device combines the strengths and virtues of all our amplifiers: naturalness, dynamics, colorful, multi-layered tones and an effortless playback of the most complex music signals.

Features
• Signal voltage amplification with tubes - Responsible for a natural, lively sound image due to high output capability with very low distortion
• Push-pull output stage - With EL84 power tubes, matched in a quartet, switched as a triode
• Power supply - Complex power supply with voltage stabilization for each amplifier stage
• Processing - High quality of all components, e.g. 1% and 0.1% precision resistors, top-quality film capacitors in the signal path, 105° electrolytic capacitors with long service life in the power supply, circuit boards with optimized conductor path.

Specifications
• Max. Output voltage Electrostatic headphones 900 Vpp
• Max. Output voltage Electrodynamic headphones 36 Vpp
• High output: 5.6W@15Ω / 1.5W@120Ω / 0.3W@600Ω
• Low output: 1.2W@15Ω / 0.6W@32Ω
• Frequency response: 20Hz (-0,45db ) to 85.000Hz (-1db)
• Inputs:
2x Stereo high level inputs Cinch
1x Stereo high level input XLR balanced
• Outputs:
1x output 5 pole, Pro bias
1x output 6 pole Normal Bias
1 x output 4 pin XLR with low output voltage
1 x output jack 6.35 mm with low output voltage
1 x output 4 pin XLR with high output voltage
1 x output jack 6.35 mm with high output voltage
• Dimensions (DWH): 34x38x14 cm
• Cabinet with 10mm front in natural or black aluminium with oiled  wooden  side panels

https://paltauf.com/index.php/en/kopfho ... er/khv-esd
Senest rettet af kvik 28. dec 2021, 11:27, rettet i alt 3 gange.
Begrundelse: Opdatering
kvik

Brugeravatar
 
IndlĂŚg: 4718
Tilmeldt: 28. jul 2011, 01:27
Geografisk sted: Norge

Re: Rør, hvis du tør - ANK Audiokits

IndlĂŚgaf kvik » 22. mar 2014, 00:49

ANK Virtuoso Headphone Amplifier (kit $2500)

ANK Virtuoso.jpg
ANK Virtuoso.jpg (403.23 KiB) Vist 15477 gange

CLASS A Headphone Amplifier 11W Triple C core, Dual Rectified.

ANK is pleased to announce our long awaited Headphone Amplifier! We took advantage of our EL84 and C core technology along with dual tube rectification to develop a stunning and powerful (11w classA) all tube Headphone amplifier that could drive the toughest headphones with ease! 

Our Triple C core technology has a 50Ohm tap on it suitable for a wide range of phones.

The design is based on our popular L1 EL84v2 amplifier which utilizes 4 x EL84 tubes along with a pair of ECF80 drivers. The Triple C core transformers drive the dual  headphone jacks located at the front of the unit.

Let take a look at the Power Supply – We start with a large Mains transformer more commonly found in power amplifiers – Then we use our CH-40W ( choke) that we use for Tube rectified circuits as found in our EL34 monos –

The Power Supply PCB is our dual 5ar4 tube rectified with dual 30uf Mundorf film capacitors. This provides the HT voltage required for the EL84 circuitry – the Filaments for the EL84 are all DC in order to ensure ultra quiet operation.

The Main EL84 PCB is also used in our popular L1 EL84v2 amplifier but with a few modifications to make it pure CLASS A and DC heated filaments – also the interface to the custom headphone C core output transformers is also unique.


SPECIFICATIONS
• 4 x EL84 Tubes
• CLASS A 11W per channel
• 50 ohm impedence output transformers
• ECF80 driver tubes
• 2 x 5ar4 Tubes for Power Supply Rectification
• Resistors – TAKMAN non magnetic
• Film capacitors : Mundorf SILVER GOLD OIL

https://ankaudiokits.com/product/headph ... uoso-el84/
https://www.canuckaudiomart.com/details ... amplifier/
Senest rettet af kvik 6. dec 2021, 19:06, rettet i alt 5 gange.
Begrundelse: Opdatering
kvik

Brugeravatar
 
IndlĂŚg: 4718
Tilmeldt: 28. jul 2011, 01:27
Geografisk sted: Norge

Re: Rør, hvis du tør - Brinkmann Audio

IndlĂŚgaf kvik » 22. mar 2014, 00:58

Brinkmann Nyquist Mk II (€15990)

Brinkmann Nyquist Mk II.jpg
Brinkmann Nyquist Mk II.jpg (621.24 KiB) Vist 40720 gange

At Munich High End 2016, Brinkmann unveiled Nyquist: the most advanced Streaming Digital-to-Analog Converter ever created. At that time, we explained that our unique, user-replaceable DAC Module would allow easy upgradeability and eliminate obsolescence, making it audio’s first-and only“Investment Quality” digital component. The release of our first Nyquist upgrade fulfills our promise and proves that our “Field-upgradeable” concept works in practice as well as theory. An entirely new design, “Nyquist” was optimized to accommodate the latest digital formats including MQA™ (Master Quality Authenticated) streaming and playback, PCM up to 384 kHz/32 bits (including DXD),as well as DSD64, DSD128 and DSD256. Both the Hardware and Software of Nyquist’s Digital Module are easily user-replaceable, an architecture that assures unprecedented longevity and enables Nyquist to remain on the cutting edge of digital technology. As promised, Nyquist virtually eliminates obsolescence.  
 
Proprietary high voltage power supply technology—unique among digital source components—delivers marked improvements in digital circuit performance. In Nyquist Mk II, this high-voltage power supply technology has been implemented more widely. As opposed to only one power regulator in the original Nyquist, 6 of the 12 Mk II regulators benefit from this technology. The Mk II digital module includes a completely updated power supply section, incorporating 12 power regulators compared to the 11 found in our first-generation product. The additional power regulator achieves an even better decoupling of the DAC clock from the rest of the circuit yielding lower jitter, especially with USB and Ethernet playback.  
 
The result? Even higher resolution with no loss of the extraordinary musicality that made the original Nyquist so successful. Another breakthrough by the newly expanded Brinkmann Design Team, custom filters in the digital domain further elevate both measured performance and musical realism. In a nod to Brinkmann’s renowned Marconi Line Preamplifier and Edison Phono Preamplifier, Nyquist employs hybrid circuit topology, with NOS Telefunken tubes used in the output stage; in fact, development of Nyquist highlighted areas in which Marconi and Edison’s circuitry could be improved and has led to “Mk II” versions of those legendary products.  
 
Because today’s music connoisseurs demand uncompromising convenience and versatility, Nyquist offers outstanding connectivity, including USB, SPDIF, Optical and Ethernet inputs. Balanced, Single-ended and discrete Headphone outputs are all standard. Nyquist offers Roon™ network playback and music management and supports many streaming services. Optimized, pre-selected filters have been carefully tailored for every digital format. A comprehensive remote handset offers control of headphone volume, input selection, mute and phase/invert. Thanks to our obsessive attention to each of these details, Nyquist achieves a level of user-friendliness unprecedented in High End Audio. Given its ease of use, matchless craftsmanship, total upgradeability and, of course, sonic superiority, Nyquist is simply the finest digital component available today…and tomorrow!



• Features: Digital module upgradable, separate converters for PCM and DSD, remote control
• Inputs: USB 2.0, SPDIF, AES-EBU, TOSLINK, RJ45 ETHERNET
• Streaming support: DLNA, Tidal, Deezer, Qobuz, vTuner and Roon
• Formats: MQA™ and PCM up to 384 kHz (DXD), DSD 64, DSD128 via DoP, DSD256 native
• Gain adjustment: 0...+10 dB
• Output voltage: Maximum 3,5 V eff.
• Output impedance: 10 ohms Balanced
• Headphone output: 30-600 Ohms
• Dimensions (WxHxD): 420 x 95 x 310 mm (with granite base); power supply 120 x 80 x 160 mm
• Weight: 12 kg; granite base 12 kg; power supply 3.2 kg


https://www.brinkmann-audio.de/main.php ... st&lang=en
Senest rettet af kvik 11. dec 2021, 01:00, rettet i alt 3 gange.
Begrundelse: Opdatering
kvik

Brugeravatar
 
IndlĂŚg: 4718
Tilmeldt: 28. jul 2011, 01:27
Geografisk sted: Norge

Re: Rør, hvis du tør - Aries Cerat

IndlĂŚgaf kvik » 22. mar 2014, 01:19

Aries Cerat Genus 845 (€16600)

Aries Cerat Genus.jpg
Aries Cerat Genus.jpg (84.6 KiB) Vist 48751 gange

Genus 845 Tube integrated amplifier

The Genus SET integrated amplifier is the answer to the challenge of making them smallest possible one-box integrated amplifier which would carry our design philosophy. In development for some years we are proud to announce the release of the ‘Offspring’ or ‘Genus’ to our family of single ended amplifiers.

With a footprint of 520mm x 530mm it is our most compact design to date, yet remains faithful to our no compromise approach. The Genus can fit where it’s bigger brothers are unable to.

The Genus integrated is 25W in Class A1 yet only has two gain stages. It takes key design ideas from our Concero 25 monoblock circuit. It is effectively a small stereo SET amplifier driving a bigger stereo SET in one chassis.

The input / driver stage is a small 0.7W SE amplifier built around the Siemens E280F super triode and is loaded with a double c-core bifilar wound interstage transformer.

This single tube stage offers maximum linearity and bandwidth for maximum transparency. No coupling capacitors are present anywhere in the circuit.

The small SE amplifier uses our proprietary AC link coupling technology to link to the output stage. This technology uses the secondary winding of the first SE amplifier to modulate the biasing circuits of the bigger 845 tube output stage. AC link coupling technology is used in all of our bigger amplifier models.

All  four tubes have independent power supply units (PSUs) which are fed from dual 400V toroid transformers, 800VA total. All four PSUs carry their own choke filtered capacitor bank.

The output stage power supply units again use our super capacitor technology. These top specification film capacitors have one to two orders of magnitude lower ESR and ESL than any electrolytic or film capacitor used in audio today, and have a maximum current surge specification exceeding 1000 amps.

The two 845 directly heated triode (DHT) tubes use triple passively filtered filament PSUs. All DHT tubes and especially the thoriated tungsten filament tubes, are extremely sensitive to noise present in their filament circuits. Our passively filtered system is fault proof and provides an extremely low noise floor with very high bandwidth and, as part our design philosophy, is without feedback.

Bias of all four tubes,both the two the driver and two output tubes can be adjusted on the fly using the built-in bias meter, so you can tailor the sound to your taste, but also monitor tube's current long term.

A self resetting soft start is used to slowly build up the high voltages present and protect the tubes from any current surges at start up.

Volume and input selection is controlled with the amplifier's built in relay system and supplied remote control. We find this far exceeds the sound quality obtained by conventional potentiometers.

Inputs: 4 RCA pairs, 1 XLR pair (balanced). Outputs: Speaker and headphone out. Speaker output impedance is pre-configured on order from 1-16 ohms and comes with a two-position output impedance selector as standard. The headphone out is user switchable to high or low output impedance for maximum compatibility.



Specifications
• Bandwidth: 11Hz~60kHz
• Output watts: 25W in Class A1
• Speaker impedance: User selectable from 1-16 ohms
• No local or global feedback
• Noise Floor: -100db unweighted
• Harmonic distortion: -64db H2 and -73db H3 @1W
• Dimensions (WDH): 52x53x28 cm with tubes
• Weight: 67Kg unpacked
• Tube compliment: 2 x 845 , 2 x E280F


http://aries-cerat.eu/products/amplifiers/genus


Note: The first iteration of the amplifier, using the 813 tubes, is available in limited numbers.



Interview excerpt

Interviewer: Are there plans to take your technology into the personal audio/headfi domain?

Stavros Danos: Even though we do not yet have in our portfolio a dedicated personal audio design, our Genus integrated is highly acclaimed as a SOTA headphone amplifier, secondary as integrated speaker amplifier, and many headphone aficionados choose it for their SOTA personal audio systems. We have a number of HP amp designs that were developed over the years and kept in the prototype stage, at least for now. As an example, we have tried some of our proprietary technologies such as the Inverted Triode system, the TriodeFet as well as the NOIES circuits, in a number of HP amplifier implementations using these technologies with extremely good results. I think these designs were (temporarily maybe) victims of bad timing – we have been overwhelmed by the introduction of some new series as well as the expanding of some existing ones. Yes, I stand guilty for the fact that we did not step fully into personal audio yet. It will happen, hopefully soon.

https://audiofi.net/2020/10/aries-cerat ... om-cyprus/
Senest rettet af kvik 6. dec 2021, 19:21, rettet i alt 3 gange.
Begrundelse: Opdatering
kvik

Brugeravatar
 
IndlĂŚg: 4718
Tilmeldt: 28. jul 2011, 01:27
Geografisk sted: Norge

ForegĂĽendeNĂŚste

Tilbage til Hovedtelefon forstĂŚrkere

Hvem er online

Brugere der lĂŚser dette forum: Ingen tilmeldte og 5 gĂŚster