Feliks Echo 2 (âŹ800)
- Feliks Echo 2.jpg (320.54 KiB) Vist 33560 gange
Echo mk2 is the entry level OTL amplifier by Feliks Audio, and offers amazing sound clarity with the typical âtubeâ feel. The amplifier is fully handmade from high quality, carefully selected components. The amplifierâs sweet spot lays with medium to high impedance headphones (from 80ohm), and can be also used as effective tube pre-amp for both tube and transistor amplifiers.
Echo mk2 is built around two 6N1P driver and two 6N6P power tubes. Power supply is based on a custom made stabilized toroidal transformer with electronic ripple suppression. The amplifier is equipped with automatic bias circuit, therefore no re-tuning is required after changing tubes.Features
⢠Incredibly detalied music scene
⢠Very low noise levels and AC interferens
⢠Broad frequency: 15 Hz - 45 kHz ¹3 dB
⢠Perferms very well also as pre-amp for tube or solid state power amps
⢠Gold plated ceramic tube sockets
⢠3 selectable audio sources plus Mute function
⢠Pre-amp mode implemented
⢠Input/output safeguards eliminating undesirable power on/off noises and distorsions
⢠Wooden, solid oak side panels
⢠Extended 3-year warranty
Technical specifications
⢠Impedance: 100 k ohm
⢠Frequency response: 15 Hz â 45 Khz Âą 3 dB
⢠Power output: 350mW
⢠Amplification level: 20dB
⢠THD: 0.4 % (300 ohm, 20 mW)
⢠Optimal headphones impedance: 80 â 600 ohm
⢠Headphones output: Jack 6.3mm
⢠Dimensions: 26.8 à 21.7 à 11.8 cm
⢠Weight: 3.5 kg
⢠AC Voltage: 230V, 120V
Box content
⢠Beautifully hand-crafted Tube Amp
⢠1 pair of driver tubes
⢠1 pair of power tubes
⢠AC cord
⢠User Manual
⢠Warranty Card
https://feliksaudio.pl/product/echo-2/Feliks Elise (âŹ1600)
- Feliks Elise.jpg (389.62 KiB) Vist 33553 gange
Elise tube amplifier by Feliks Audio offers exceptionally dynamic sound stage and superb level of detail with the typical âtubeâ feel. The amplifier is a fully proprietary design, built from high quality, carefully selected components, allowing it to deliver exceptional sound quality on a broad range of headphones, including low impedance headphones (32 ohm). Alternatively, Elise can be used as pre-amp for both tube and transistor amplifiers.
Power supply is based on a custom made stabilized toroidal transformer with electronic ripple suppression. The amplifier is equipped with automatic bias circuit, therefore no re-tuning is required after changing tubes.Input/output safeguards eliminates undesirable power on/off noises and distortions.
Elise is originally equipped with high quality tubes. Stock driver tubes are 6SN7 power tubes are 6N13S. Tubes can be changed by the user, to the following:
Driver tubes: 6N8S, CV181, ECC32, 5692, 6F8G
Power tubes: 6080, 5998, 6N5P, 6N5S, ECC230, 7236, CV2523.Features
⢠Virtually no background noise
⢠Beautifully hand-crafted
⢠New high-end audio class transformer providing improved stability, more power and better resistance to external interference
⢠Driver tubes are upgraded to high quality PSVANE 6SN7 "UK Audio!
⢠Broad frequency: 10 Hz - 60 kHz ¹ 3 dB
⢠Great tuning potential (via upgraded tubes)
⢠Pre-amp mode implemented
⢠Input/output safeguards eliminating undesirable power on/off noises and distorsions
⢠Extended 3-year warranty
⢠Improved noise reduction circuit
Technical specifications
⢠Impedance: 100 k ohm
⢠Frequency response: 10 Hz â 60 Khz Âą 3 dB (300 ohm)
⢠Power output: 200mW
⢠Amplification level: 20dB
⢠THD: 0.4 % (300 ohm, 20 mW)
⢠Optimal headphones impedance: 32 â 600 ohm
⢠Headphones output: Jack 6.3mm
⢠Dimensions: 30.6 à 20.3 à 19 cm
⢠Weight: 6 kg
⢠AC Voltage: 230V, 120V
Box content
⢠Beautifully hand-crafted Tube Amp
⢠1 matched pair of driver tubes PsVane 6SN7 Hi-Fi
⢠1 matched pair of power tubes 6N13S (NOS)
⢠AC cord
⢠User Manual
⢠Warranty Card
https://feliksaudio.pl/product/elise/Feliks Euforia (âŹ2200)
- Feliks Euforia.jpg (335.09 KiB) Vist 33560 gange
Euforia is Feliks Audio flagship headphone amplifier launched in 2017. This beautifully handcrafted OTL, built around two 6SN7 and two 6AS7G tubes, delivers amazing dynamics, sound stage and level of details never heard of before in tube amplifiers, at the same time giving the unmistakably tube sound signature. Euforia's unique design allows for exceptional sound quality with a broad range of headphones, powerful enough to drive even demanding low impedance headphones (<32 ohm) including planar magnetics.
Euforia is built with two 6AS7G (also accepts 6080) power tubes and two 6SN7 driver tubes. Power supply is based on a custom made stabilized toroidal transformer with electronic ripple suppression. The amplifier is equipped with automatic bias circuit, therefore no re-tuning is required after changing tubesFeatures
⢠Unrivalled neutrality and sound stage
⢠Incredibly detailed and dynamic music scene
⢠Crossfeed circuit - a revolutionary solution in tube amplifiers
⢠Virtually no background noise
⢠Beautifully hand-crafted
⢠Broad frequency: 8 Hz - 75 kHz ¹ 3 dB
⢠Premium driver tubes
⢠Improved noise reductiona circuit
⢠High-end class power transformer
⢠100% pure silver signal wiring in teflon jakcet
⢠Heavy duty teflon gold-plated tube sockets
⢠High quality Mundorf and Nichicon capacitors
⢠Dale and Caddock resistors
⢠Preamp safety circuit
⢠Gold-plated RCA inputs
⢠Extended 3-year warranty
Technical specifications
⢠Impedance: 100 k ohm
⢠Frequency response: 8 Hz â 75 Khz +/- 3 dB (300 ohm)
⢠Power output: 250mW
⢠Amplification level: 20dB
⢠THD: 0.4 % (300 ohm, 20 mW)
⢠Optimal headphones impedance: 32 â 600 ohm including planar magnetics
⢠Headphones output: Jack 6.3mm
⢠Dimensions: 31.3 à 20.3 à 19.3 cm$
⢠Weight: 7 kg
⢠AC Voltage: 230V, 120V
Box content
⢠Beautifully hand-crafted Tube Amp
⢠Matched pair of driver tubes PsVane CV-181 Mk2 âGoldâ
⢠Matched pair of power tubes 6N13S (NOS) *
⢠AC cord
⢠User Manual
⢠Warranty Card
https://feliksaudio.pl/product/euforia/Feliks Euforia Anniversary (âŹ3100)
- Feliks Euforia Anniversary.jpg (475.24 KiB) Vist 33560 gange
Special version of our flagship amplifier Euforia â the 20th Anniversary EditionÂ
Features
⢠Ultimate achievement in pure OTL technology
⢠New level of smoothness and clarity: 100% single crystal copper wiring, premium internals
⢠High gloss space grey finish to celebrate the anniversary
Technical specifications
⢠Impedance: 100 k ohm
⢠Frequency response: 7 Hz â 80 Khz +/- 3 dB (300 ohm)
⢠Power output: 280mW
⢠Amplification level: 20dB
⢠THD: 0.4 % (300 ohm, 20 mW)
⢠Optimal headphones impedance: 32 â 600 ohm including planar magnetics
⢠Headphones output: Jack 6.3mm
⢠Dimensions: 31.3 à 20.3 à 19.3 cm$
⢠Weight: 7 kg
⢠AC Voltage: 230V, 120V
Box content
⢠Matched pair of driver tubes PsVane CV-181 Mk2 âGoldâ
⢠Matched pair of power tubes 6N13S (NOS)
⢠AC cord
⢠User Manual
⢠Warranty Card
https://feliksaudio.pl/product/euforia-anniversary/Feliks Envy (âŹ6500)
- Feliks Envy.jpg (511.23 KiB) Vist 33560 gange
Please welcome âEnvy" - the latest and the most advanced headphone amplifier from Feliks Audio.
Â
This new flagship was designed from scratch to satisfy the most demanding head fi needs. It serves customers requiring not only immense output power (up to 8 Watts from the 300B tubes) to drive virtually any available headphones (dynamic or planar magnetic), but also provide utmost sound quality as a balanced Class A, single-ended design. The fit and finish is of course immaculate, with various natural oiled wood options available to customize the looks. If youâre looking for the best premium tube amplifier for your high-end headphones, we hope you have found your end-game.Features
⢠Up to 8 Watts of sophisticated single ended power from the legendary 300B tubes
⢠User selectable Hight/Medium/Low headphone impedance for best match with any dynamic/planar magnetic headphones
⢠Exclusive finish and extensive customization options
⢠State of art oiled wood finish (oak, other possible)
⢠Your own laser engraving
⢠Internal components customization
⢠Multiple inputs and outputs for maximum functionality
⢠Balanced input and output using XLR connections for best fidelity, plus 3 selectable audio sources
⢠Pre-amplifier output RCA and XLR
⢠Standard Edition includes Electro Harmonix Gold 300B power tubes and Premium copper signal wiring
⢠Performance Edition includes Full Music 300B power tubes and UPOCC (single crystal copper) signal wiring
Technical specifications
⢠Power tubes: 300B
⢠Driver tubes: PsVane CV-181 mk2 (6SN7)
⢠Inputs: 2x unbalanced RCA inputs (IN1, IN2) / 1x balanced XLR input (IN3)
⢠Input sensitivity 1V RMS
⢠Input impedance: IN1 & IN2 (RCA) 100kΊ / IN3 (XLR) 10kΊ
⢠Pre-Out: 1x pair of RCA / 1x pair of XLR
⢠Maximum voltage on the above outputs is 5V (RMS) at output impedance of 600Ί and THD<0,5%
⢠Impedance selector guidance: LO â up to 60Ί / MID â up to 300Ί / HI â up to 600Ί
⢠Amplifierâs impedance: LO at 32Ί load is 3,8Ί / MID at 100Ί load is 8,8Ί / HI at 600Ί is 20Ί
⢠Output powered measured at MID impedance setting at load of 16Ί is 5W with THD ⊽1% (maximum 8W at THD >5%)
⢠Frequency response: 8Hzá100kHz ¹3dB / 18Hzá40kHz ¹1dB
⢠Headphone outputs: 6.3mm and XLR
⢠AC voltage 50/60Hz: 230V version (¹5%) / 115V version (¹5%)
⢠Power consumption: 110VA
⢠Weight: 15,1kg (without packaging)
⢠Dimensions (LWH): 35x33x18,5cm â w/o tubes / 35x33x24,5cm â with tubes
Box content
⢠Matched pair of driver tubes CV-181(6SN7)
⢠Matched pair of power tubes 300B
⢠AC cord
⢠User Manual
⢠Warranty Card
Upgrade options
⢠Performance edition +âŹ500
⢠Wood finish: American walnut +âŹ200, Custom +âŹ400
https://feliksaudio.pl/product/envy/